471426
12
Zoom out
Zoom in
Previous page
1/16
Next page
12
(R)
(L)
(R)
(L)
SYSTEM DIAGRAMS/DIAGRAMMES DU SYSTÈME/DIAGRAMAS DEL SISTEMA
• One Speaker System/Système à un haut-parleur/Sistema de un altavoz
Important Tips on Bridging an Amplifier/Conseils importants lors de la mise en pont d’un amplificateur/Consejos importantes cuando conecte en puente un amplificador
NOTE:
1) The following problem may occur if the amp is
not properly connected.
Low output when only one input is used.
2) The Y-Adapter is not required if a line output, ste-
reo pair is used to drive both inputs of the bridged
amp (as shown in Fig. 9).
REMARQUE :
1) Le problème suivant peut apparaître si
l’amplificateur n’est pas correctement connecté.
Faible puissance lorsqu’une seule sortie est
utilisée.
2) L’adaptateur Y n’est pas nécessaire si une sortie de
ligne ou un couple stéréo sont utilisés pour les deux
sorties de l’amplificateur ponté (voir la Fig. 9).
NOTA:
1) Podría ocurrir el siguiente problema si el
amplificador no se encuentra correctamente
conectado.
Salida baja cuando se utiliza sólo una entrada.
2) El adaptator-Y no es necesario si se utiliza una
pareja de salida en línea/estéreo para conducir
ambas entradas del amplificador puenteado (tal
como se indica en la Fig. 9).
Proper connection/Connexion correcte/
Conexión correcta
Improper connection/Connexion incorrecte/
Conexión incorrecta
)lañes anU/langis nU/langis enO()lañes anU/langis nU/langis enO(
Use either RCA line level or speaker level inputs. Do not connect both at the same time./Utiliser les entrées de niveau de ligne RCA ou de niveau de haut-parleur.
Jamais les connecter à la fois./Utilice las entradas de nivel de altavoz o de nivel de línea RCA. No conecte las dos al mismo tiempo.
)
~
~
)
(
Fig. 10
REMARQUE :
Lors de la connexion avec le conducteur d’entrée de
haut-parleur, voir le système de la Fig. 11.
[Français]
Adaptateur-Y (vendu séparément)
Câble de rallonge (vendu séparément)
Unité principale avec sorties de
préamplificateur
Haut-parleur de sous-graves
NOTA:
Cuando haga la conexión con el conductor de entrada
de altavoz, vea el sistema de la Fig. 11.
[Español]
Adaptador-Y (vendido separadamente)
Cable de extensión (vendido separadamente)
Unidad principal con salidas de
preamplificador
Altavoz de frecuencias ultrabajas
NOTE:
When making the connection with the speaker input
lead, refer to the system shown in Fig. 11.
[English]
Y-Adapter (Sold Separately)
Extension Cable (Sold Separately)
Head Unit with Pre-Amp Outputs
Subwoofer
)
+
3
5
~
}
(
)
~
+
(
)
~
+
(
)
~
+
MRP-M2000
4
Fig. 9
(R) (L)
(Left side/Côté gauche/Lado izquierdo)
(Right side/Côté droit/
Lado derecho)
30A 30A 30A 30A 30A 30A
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine MRP-M2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine MRP-M2000 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info