66348
7
Zoom out
Zoom in
Previous page
1/60
Next page
5-EN
ALPINE KTX-100EQ 68-08564Z99-A (EN)
7
When microphone placement is complete, get out of the vehicle, and close all doors,
windows and sunroof. Then, start measurement by double-clicking the Measure
button on the IMPRINT SOUND MANAGER screen. Do not open the doors until
“Complete” is displayed on the screen and signal sound is output from the speakers
and sound characteristics are measured in the vehicle. If noise enters from outside
during measurement, “Error” will be displayed on the screen. If displayed, measure
again by double-clicking the Measure button.
Perform PC operation outside the vehicle.
As measurement error may cause, never remove the microphone during measurement.
8
When the first measurement is complete, move the microphone to the next
measurement location according to the indications on the screen and set it up.
Repeat the procedure in step 7 according to the indications on the screen.
Preforming measurement from two locations in the car should be sufficient. If you want to finish after two
measurement locations, double-clicking the Result button, and move to the Target Curve setting.
For more precise measurement, 6 measurement locations are available; however, it will take approx. 40 minutes
until all MultEQ measurements have been completed. In this case, be sure to perform MultEQ measurement
with the vehicle connected to a car battery charger.
9
When measurement is complete, double-clicking the Result button, and make the
Target Curve setting for sound characteristics adjustment. Select the Target Curve
Select button on the screen for the target curve setting.
The measurement data cannot be stored on the PC hard disc, but can be memorized in the CDA-9887/CDA-
9887R.
KTX-100EQ.book Page 5 Friday, April 13, 2007 4:31 PM
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine KTX-100EQ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine KTX-100EQ in the language / languages: English as an attachment in your email.

The manual is 3,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info