471357

Alpine iXA-W407BT Manual

12
Zoom out
Zoom in
Previous page
1/73
Next page
10-EN
Presetting Stations Manually
1
Tune in a desired radio station you wish to store in
the preset memory by manual or automatic seek
tuning.
2
Touch [PRESET] to display the list screen of preset
stations.
3
Touch and hold any one of the preset stations
(1 through 6) for at least 2 seconds.
The current station is stored.
4
Repeat the procedure to store up to 5 other stations
onto the same band.
To use this procedure for other bands, simply select the
desired band and repeat the procedure.
A total of 30 stations can be stored in the preset memory
(6 stations for each band; FM1, FM2, FM3, MW or LW).
• Touch [ ] to cancel the list screen of preset stations.
• If a preset memory has already been set in the same preset number, it
will be cleared and the new station will be memorised.
Presetting Stations Automatically
The tuner can automatically seek and store 6 strong stations in the
selected band in order of signal strength.
After selecting the desired band, touch and hold
[A.MEMO] for at least 2 seconds.
The tuner automatically seeks and stores 6 strong stations into
preset station 1 to 6 in order of signal strength.
When the automatic storing has been completed, the tuner goes
to the station stored in preset location No.1.
• If no stations are stored, the tuner will return to the original station
you were listening to before the automatic storing procedure began.
Tuning to Preset Stations
You can tune in the preset stations in memory on each band using the
preset number.
1
After selecting the desired band, touch [PRESET] to
display the list screen of preset stations.
2
Touch any one of the preset stations (1 through 6)
that has your desired radio station in memory.
The preset station is received.
• Touch [ ] to cancel the list screen of preset stations.
Display example for RDS main screen
Displays the Radio text (When a Radio station transmits
text messages).
Turning AF (Alternative Frequencies) On
or Off
The RDS (Radio Data System) is a radio information system using the
57 kHz subcarrier of regular FM broadcast. The RDS allows you to
receive a variety of information such as traffic information, station
names, and to automatically re-tune to a stronger transmitter that is
broadcasting the same programme.
1
After performing steps 1, 2, 3 and 4 in “Listening to
the Radio” (page 9), touch [P1/2]* to change the
function guide.
2
Touch [AF] to select the AF (Alternative Frequency)
ON or OFF mode.
* [P1/2] will not be displayed when the band of radio is set to MW or
LW.
• When the AF ON mode is selected, the unit automatically tunes to a
strong signal station in the AF list.
• Use the AF OFF mode when automatic re-tuning is not required.
Tips
• If the unit receives the PTY31 (Emergency Broadcast) signal, the unit
will show “ALARM” in the display only when PTY31 is set to ON.
For operation, refer to
“Setting PTY31 (Emergency Broadcast)
Reception” (page 16).
• The RDS digital data includes the following:
• Refer to page 16 about “PI Seek Setting”, “Receiving RDS Regional
(Local) Stations”, “Switching the Display Language of PTY
(Programme Type)” and “Setting PTY31 (Emergency Broadcast)
Reception”.
RDS Operation
PI Programme Identification
PS Programme Service Name
AF List of Alternative Frequencies
TP Traffic Programme
TA Traffic Announcement
PTY Programme Type
EON Enhanced Other Networks
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine iXA-W407BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine iXA-W407BT in the language / languages: English as an attachment in your email.

The manual is 4,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alpine iXA-W407BT

Alpine iXA-W407BT User Manual - Dutch - 73 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info