471357

Alpine iXA-W407BT Manual

10
Zoom out
Zoom in
Previous page
1/73
Next page
8-EN
Turning Power On or Off
Some of this unit’s functions cannot be performed while the vehicle is in
motion. Be sure to stop your vehicle in a safe location and apply the
parking brake, before attempting these operations.
1
Press
SOURCE to turn on the unit.
• The unit can be turned on by pressing any button. The unit is also
automatically turned on if an iPhone/iPod or USB memory is
connected.
2
Press and hold
SOURCE for at least 3 seconds to
turn off the unit.
• The monitor may be dim during low temperature and immediately
after turning on the power. The brightness will return to normal as
time elapses.
• The iXA-W407BT is a precision device. With gentle handling, its
unique capabilities can be enjoyed for a long time.
Adjusting the Volume
Adjust the volume by pressing or .
Volume decreases/increases continuously by pressing and
holding
or .
Volume: 0 - 35
• The MUTE function can be performed by using the supplied remote
control.
How to view the Display
• Be sure to touch the button lightly with the pad of your finger on the
display to protect the display.
• If you touch a button and there is no reaction, remove your finger
from the display, and try again.
Here is an example explanation for the Radio mode display on how to
recall a source.
1
Press
SOURCE to activate mode switching
screen.
2
Slide the display horizontally with your finger to
select Audio/Visual mode.
Each time you slide the display, the mode switches
circularly in the following order:
Audio/Visual Navigation*
1
Camera*
2
Telephone*
3
Multi Info Audio/Visual
*
1
Displayed only when NAV. IN is set to ON. Refer to “Setting
Navigation Mode” (page 21).
*
2
Displayed only when Camera IN is set to RCA or DIRECT. Refer to
“Setting the Rear Camera Input” (page 21).
*
3
Displayed only when Bluetooth IN is set to BUILT-IN. Refer to
“Setting the BLUETOOTH Connection (Bluetooth IN)” (page 23).
• The mode can also be switched by pressing and .
• If the current mode is not Audio/Visual mode, you can switch to the
Audio/Visual mode directly by pressing
SOURCE.
Display example for mode switching screen
Changes to the Rear Selection screen when “Setting the
Picture Output” (page 22) is set to ON.
Touch and hold [SETUP] for at least 2 seconds to
change to the SETUP selection screen.
Displays the name and image of the current mode.
Displays the icons of the five modes.
(icon of the current mode is highlighted.)
3
Slide the display vertically with your finger, or press
SOURCE repeatedly to select RADIO source.
4
Touch the RADIO source window displayed in the
centre of the screen.
The RADIO source is activated and the display changes to
the RADIO main screen.
Soft button operation
About the button descriptions used in this Owner’s Manual
• Soft buttons, ones found in the display, are shown in bold
enclosed in brackets, [ ] (e.g. [SETUP]).
• Whenever a soft button and a head unit button have the same
function, the explanations in this Owner’s Manual will describe
the function of the soft button.
Recalling the Source
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine iXA-W407BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine iXA-W407BT in the language / languages: English as an attachment in your email.

The manual is 4,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alpine iXA-W407BT

Alpine iXA-W407BT User Manual - Dutch - 73 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info