536907
18
Zoom out
Zoom in
Previous page
1/53
Next page
18-EN
Audio Setup
You can flexibly customize the unit to suit your own preference and
usage. From the AUDIO SETUP menu, Audio Setting can be modified.
1
Press and hold AUDIOSETUP for at least 2 seconds to
activate the SETUP mode.
2
Turn the Rotary encoder to select Audio, and then press
ENTER.
Audio
*1
General Display Tuner iPod&USB
Application Bluetooth
*2
Audio
*1 Adjustment cannot be performed during a call.
*2 Only for CDE-178BT/iDE-178BT.
3
Turn the Rotary encoder to select the desired sound
setting menu, and then press ENTER.
Factory’s EQ
*3/*4
Parametric EQ
*3/*5
VOL LV ADJ
Subwoofer Subwoofer Phase
*6
Subwoofer System
*6
Power
IC MX Setup
*3
TCR Parameter
*3
T.Correction
*3
Spatial
*3
X-Over
*3
Factory’s EQ
*3 Adjustment cannot be performed when DEFEAT is set to ON.
*4 Any changes made to either Factory’s EQ or Parametric EQ are
reflected in the others’ settings.
*5 In step 3, nine sound adjustment items can be selected in
Parametric EQ mode. Turn the Rotary encoder to select the
desired item, and then press ENTER to continue to step 4.
*6 These functions are inoperable when Subwoofer is set to OFF.
4
Turn the Rotary encoder to change the setting, and then
press ENTER.
5
Press and hold AUDIO/SETUP for at least 2 seconds to
return to normal mode.
Notes
Pressing r returns to the previous Sound menu mode.
If no operation is performed for 60 seconds, Sound menu mode is
cancelled.
10 typical equalizer settings are preset at the factory for a variety of
musical source material. User settings are created in the Parametric EQ
mode.
User Flat (Initial setting) Pops Rock News
Jazz&Blues Electrical Dance Hip Hop&Rap Easy Listening
Country Classical
Note
The Parametric EQ is used to create the Factory’s EQ settings.
You can modify the Equalizer settings to create a response curve more
appealing to your personal taste.
1
After selecting Parametric EQ from the Audio Setup
mode, turn the Rotary encoder to select the desired band,
then press ENTER.
2
Turn the Rotary encoder to select the desired frequency
within the selected band, then press ENTER.
3
Repeat step 2 to adjust the Bandwidth and Level within
the selected band.
Adjusting the Band
Setting contents:
Band1/Band2/Band3/Band4/Band5/Band6/Band7/Band8/
Band9
Adjusting the Frequency (Freq.)
Adjustable frequency bands: 20 Hz to 20 kHz
Setting the Bandwidth (Q)
Setting contents:
3.0 (Initial setting) / 4.0 / 5.0
Notes
Settings exceeding the frequency of adjacent bands are not available.
While adjusting the Parametric EQ, you should consider the frequency
response of the connected speakers.
When the Parametric EQ is adjusted, the adjustment for Factory’s EQ
becomes ineffective.
The Parametric EQ setting can be configured when Defeat is OFF.
Adjusting the Level
Setting contents:
−7 to +7 (Initial setting: 0)
Notes
Band2 and Band8 are the same as the Bass and Treble controls. Their
Level adjustment can also be controlled by pressing AUDIO and
selecting Bass Level or Treble Level. Refer to “Adjusting Subwoofer
Level/Bass Level/Treble Level/Balance (Between Left and Right)/Fader
(Between Front and Rear)/Defeat” on page 17.
Settings exceeding the frequency of adjacent bands are not available.
While adjusting the Parametric EQ, you should consider the frequency
response of the connected speakers.
The Parametric EQ is used to create the Factory’s EQ settings.
The output level of each source is individually adjustable. For example, if
the Tuner level sounds lower than Disc, its output can be adjusted
without affecting the other sources.
Setting item: VOL LV ADJ
Further setting items: Tuner / Disc
*1
/ USB / iPod / BT Audio
*2
/ vTuner / AUX
Setting contents:
−14 dB ~ +14 dB
*1 Only for CDE-178BT/CDE-175R.
*2 Only for CDE-178BT/iDE-178BT.
Use steps 1 to 5 to select one of the setting modes to modify.
See the applicable section below for details about the
selected setting item.
Equalizer Presets (Factory’s EQ)
Adjusting the Parametric Equalizer Curve
(Parametric EQ)
Band1: 20 Hz ~ 100 Hz (63 Hz)
Band2: 63 Hz ~ 315 Hz (125 Hz)
Band3: 125 Hz ~ 500Hz (250 Hz)
Band4: 250 Hz ~ 1 kHz (500 Hz)
Band5: 500 Hz ~ 2 kHz (1 kHz)
Band6: 1 kHz ~ 4 kHz (2 kHz)
Band7: 2 kHz ~ 7.2 kHz (4 kHz)
Band8: 5.8 kHz ~ 12 kHz (8 kHz)
Band9: 9 kHz ~ 20 kHz (16 kHz)
Setting the Source Volume Level
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine iDE178BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine iDE178BT in the language / languages: English as an attachment in your email.

The manual is 4,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alpine iDE178BT

Alpine iDE178BT Quick start guide - English, German - 112 pages

Alpine iDE178BT User Manual - German - 58 pages

Alpine iDE178BT Quick start guide - Dutch - 112 pages

Alpine iDE178BT User Manual - Dutch - 58 pages

Alpine iDE178BT Quick start guide - French, Italian, Polish, Swedish, Spanish - 112 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info