168536

Alpine dva 9860 r Manual

33
Zoom out
Zoom in
Previous page
1/64
Next page
32-EN
Graphic Equalizer Adjustments
The graphic equalizer allows you to modify the sound using 31 bands
each for the front (left and right), rear (left and right) and centre
speakers. An additional 10 bands are available for the subwoofer. This
allows you to customize the sound to suit your taste.
1
Check that Defeat mode is of f (page 19).
2
Press and hold CENTER f. for at least 2 seconds.
The audio processor control mode is activated.
3
Select the G-EQ mode by pr essing CENTER f.
repeatedly .
4
Select L+R or L/R by pr essing and holding BAND
for at least 2 seconds.
L+R: Sets the same adjustment values for the left and
right channels.
L/R: Different adjustment values can be set for the left
and right channels.
When parametric EQ is adjusted, this setting will be
turned off.
5
Select the desir ed channel by pr essing g or
f.
When L+R is selected :
FRONT → REAR → CENTER → SUBWOOFER →
FRONT
When L/R is selected :
FRONT L → FRONT R → REAR L → REAR R → CENTER
→ SUBWOOFER → FRONT L
• The speakers display differs, depending on the connected speakers.
6
Select the fr equency by tur ning and then pr essing
the Rotary encoder.
Adjustab le frequenc y:
FRONT/REAR/CENTER: 20Hz - 20kHz (in 1/3 octave
steps)
SUBWOOFER: 20Hz - 160Hz (in 1/3 octave
steps)
7
Adjust the level (LEVEL) (±9dB 1dB step) by
tur ning and then pr essing the Rotary encoder.
8
To adjust other channels, r epeat steps 5 to 7.
9
When the setting is complete, pr ess and hold
CENTER f. for at least 2 seconds.
The unit returns to the normal mode.
Press CENTER f. to select another item to be set.
• When the speaker is set to the “OFF” mode, the level of the
graphic equalizer for that speaker cannot be adjusted. Refer to
“Setting the Speakers” (page 30).
• Check the playable frequency ranges of the connected speakers
before making the equalizer adjustments. If the speaker’s playable
frequency range is 55 Hz to 30 kHz, for example, adjusting the
40 Hz or 20 Hz band has no effect. Additionally, you may overload
and damage the speakers.
• When graphic EQ is adjusted, the adjustment for parametric EQ
becomes ineffective.
• When the setting is complete, it is recommended to store the setting
contents. For storing, refer to page 37.
8
Select the desir ed channel by pr essing g or
f.
When L+R is selected :
FRONT 1 → FRONT 2 → REAR → CENTER →
SUBWOOFER → FRONT 1
When L/R is selected :
FRONT 1L → FRONT 1R → FRONT 2L → FRONT 2R →
REAR L → REAR R → CENTER → SUBWOOFER →
FRONT 1L
• The speakers display differs, depending on the connected speakers.
9
Adjust the calculated time cor rection value (0.00 to
20.00ms) by tur ning and then pr essing the Rotary
encoder.
Switching the Phase
10
Switch the phase (PHASE) by tur ning and then
pressing the Rotary encoder.
11
To adjust other channels, r epeat steps 8 to 10.
12
When the setting is complete, pr ess and hold
CENTER f. for at least 2 seconds.
The unit returns to the normal mode.
Press CENTER f. to select another item to be set.
• When the speaker is set to the “OFF” mode, the TCR for that
speaker cannot be set. Refer to “Setting the Speakers” (page 30).
• The adjustment value for FRONT2 (Speakers) which is adjusted in
time correction, is also applied to the front speakers in “Setting
Bass Focus” (page 34).
• The adjustment (AUTO TCR) cannot be automatically set on this
unit.
• When the setting is complete, it is recommended to store the setting
contents. For storing, refer to page 37.
… 33 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine dva 9860 r at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine dva 9860 r in the language / languages: English as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info