471310
27
Zoom out
Zoom in
Previous page
1/42
Next page
25-EN
Calling
Calling by the address book
You can call up the address book registered in the
portable telephone to call from.
1 Press and hold the BAND/TEL. button for at least 2
seconds.
2 Press the SEARCH button to select the PHONE BK
(Phone Book) mode.
A list in alphabetic order is displayed.
(Retrieving an addressee by Alphabetic Sort List to
place a call)
3 When displaying the Alphabetic Sort List, select the
addressee by turning the Rotary encoder or pressing
the g or f button, then place a call by pressing
the :/J button or Rotary encoder.
4 Press the BAND/TEL. button to end the call.
The telephone mode will end and return to the original
source mode.
(Retrieving an addressee by Selecting Search (A-Z
search) to place a call).
3 Select an initial letter (A to Z) of the addressee by
pressing the 8 or 9 button.
4 Select the addressee by turning the Rotary encoder
and place a call by pressing the Rotary encoder.
5 Press the BAND/TEL. button to end the call.
The telephone mode will end and return to the original
source mode.
NOTE
If all telephone numbers and registered names cannot be
displayed at once, press DISP/TITLE button to show
undisplayed numbers and names.
Calling by using the Speed Dial
You can place a call by retrieving one of the telephone
numbers registered in No. 1 to 9 of the address book.
1 Press and hold the BAND/TEL. button for at least 2
seconds.
2 Within 5 seconds, place a call by pressing and holding
the desired preset buttons (1 through 6) for at least 2
seconds.
By pressing the F/SETUP button, and then pressing
the preset button (1 through 3) for at least 2 seconds,
you can place a call to the number registered in 7 to 9.
NOTES
You can place a call by pressing the :/J button after
momentarily pressing the preset button (1 through 6) of the
number you wish to call.
You can place a call by pressing the Rotary encoder, after
selecting a number which you wish to call, by pressing the
g or f button or by turning the Rotary encoder.
3 Press the BAND/TEL. button to end the call.
The telephone mode will end and return to the original
source mode.
NOTE
If there is no telephone number registered to a preset button,
"NO P-SET" is displayed when you try to place a call.
Calling by the outgoing/incoming/absent
incoming history
You can place a call to any of the last 999 calls by the
outgoing/incoming/absent incoming history.
1 Set the history mode by pressing the SEARCH
button in PHONE BK (Phone Book) mode.
2 Select “DIALED” (outgoing history), “RECEIVED”
(incoming history) or “MISSED” (absent incoming
history) by pressing the 8 or 9 button.
3 When the addressee has been selected by turning the
Rotary encoder, or pressing the g or f button
from the outgoing or incoming history, place a call by
pressing the :/J button or the Rotary encoder.
4 Press the BAND/TEL. button to end the call. The
telephone mode will end and return to the original
source mode.
NOTES
“NO MEM” is displayed if there is no incoming history.
If all telephone numbers and registered names cannot be
displayed at once, press DISP/TITLE button to show
undisplayed numbers and names.
SMS (Short Message Service)
Operation
You can be informed when you receive a short
message.
Receiving a short message
1 When a text message is received, “NEW MSG” is
indicated on the display.
The contents of the received message can only be
read from the portable phone's display.
2 Press any one of the buttons on the unit to cancel the
display. The buttons that are pressed will enter the
mode or will be activated.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine CDA-9826 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine CDA-9826 in the language / languages: English as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info