471310
26
Zoom out
Zoom in
Previous page
1/42
Next page
24-EN
About
MobileHub™
Link
Connect a separately sold Junction Box and a portable
telephone (available from Nokia) to control the incoming
and outgoing calls of the portable telephone.
CAUTION
Even with hands-free operation, a driver can be distracted
during telephone operation or receiving a call. For the sake of
safety, drivers are requested to refrain from operating the
telephone while driving.
For the sake of safety, operations other than incoming calls
and Speed-Dial outgoing calls cannot be used.
NOTES
If a portable telephone is connected, its address book,
incoming and outgoing history are downloaded to the
Junction Box.
Please refer to the instruction manual of the Junction BOX.
Telephone Mode ON/OFF
1 Press and hold the BAND/TEL. button for at least 2
seconds to turn ON Telephone mode.
To turn OFF, press the BAND/TEL. button.
See relevant pages for each item.
NOTES
When a portable telephone is not connected, press and hold
the BAND/TEL. button for at least 2 seconds. “NO PHONE”
is displayed for about 2 seconds, then the mode returns to the
original source mode
When the portable telephone is taken off the Junction BOX
during an incoming or outgoing call, or during a hands-free
call, the call will be treated as an ordinary one by the
portable telephone.
When there is an incoming call while the power of CDA-9827/
CDA-9826/CDA-9825 is OFF, the power of CDA-9827/CDA-
9826/CDA-9825 will turn ON automatically for a hands-free
call.
Even if the power of the portable telephone is OFF, when
CDA-9827/CDA-9826/CDA-9825 is set to the telephone
mode, the power of the portable telephone will be turned ON.
Even if the ACC power of the vehicle is turned OFF (even if
the engine is stopped) during a hands-free call, the call is not
disconnected, and an ordinary call by the portable telephone
is possible.
If there is an incoming call during operation (except an
outgoing call or talking), operation mode will end and switch
to the incoming or talking mode.
MobileHub™ Link Operation
(
Optional
)
SOURCE/
POWER
Preset buttons
(1 through 6)
BAND/
TEL.
f
g
Rotary encoder
SEARCH
F/SETUP
-/J
9
8
An outgoing call from a portable telephone is also possible.
However, you cannot perform different operations at the same
time from a portable telephone and CDA-9827/CDA-9826/
CDA-9825 as malfunction can result.
With a Junction BOX connected outgoing, incoming, and
sending history will also be recorded in the portable
telephone.
While telephoning, DEFEAT is also set to ON. When the call
has finished, the unit returns to the setting which you
previously set.
The telephone volume can be adjusted from the CDA-9827/
CDA-9826/CDA-9825. The volume you set during the call is
memorized, and is automatically applied again on the next
call.
While telephoning or receiving incoming calls, press the
DISP/TITLE button to indicate the Network Operator
display for 5 seconds.
Incoming Calls
1 Press the :/J button to receive an incoming call.
2 Press the BAND/TEL. button to finish a call.
The telephone mode will end and return to the original
source mode.
NOTES
When the Automatic Calling mode is on, you can talk after 3
seconds of receiving the incoming call.
The incoming call can be switched to Automatic Calling or
Manual Calling.
1. Press and hold the F/SETUP button for at least 3 seconds.
2. Select the TEL mode by pressing the g or f button.
3. Press the BAND/TEL. button to change to TEL AUTO or
TEL MANU.
4. Press the F/SETUP button to return to normal mode.
Press the BAND/TEL. button during an incoming call to
disconnect it.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine CDA-9826 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine CDA-9826 in the language / languages: English as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info