536968
19
Zoom out
Zoom in
Previous page
1/57
Next page
19-EN
2:
Subwoofer level change is different from the main volume setting.
For example, even at low volume settings, the subwoofer is still
audible.
The subwoofer output phase is toggled SUBWOOFER NORMAL (0°) or
SUBWOOFER REVERSE (180°). To adjust the level, turn the Rotary
encoder.
Setting item: SUBW. Phase
Setting contents:
PHASE 0° (Initial setting) / PHASE 180°
You can set the subwoofer output to stereo or monaural. Make sure to
set the correct output for your subwoofer type.
Setting item: SUBW. Channel
Setting contents:
STEREO (Initial setting) / MONO
STEREO:
Subwoofer stereo (L/R) output
MONO:
Subwoofer monaural output
This setting gives you a choice of 5-band parametric, or 7-band graphic
equalizer.
Setting item: EQ Mode
Setting contents:
Graphic EQ / Parametric EQ (Initial setting)
GEQ:
7-band Graphic EQ
PEQ:
5-band Parametric EQ
You can change the unit, (cm or inch) of time correction.
Setting item: TCR Parameter
Setting contents:
cm (Initial setting) / inch
The setting of Parametric EQ/Graphic EQ and Time Correction can be
adjusted in this mode.
Adjusting the Parametric Equalizer Curve
You can modify the Equalizer settings to create a response curve more
appealing to your personal taste. To adjust the Parametric Equalizer
Curve, set the EQ Mode to Parametric EQ. For details, refer to “Setting
EQ mode” on page 19.
1
After selecting Parametric EQ from the Sound Field mode,
press BAND to select the band to be adjusted.
Band 1 Band 2 Band 3 Band 4 Band 5 Band 1
2
Press or to select frequency bands.
Adjustable frequency bands: 63 Hz to 17.5 kHz (in 1/3 octave
steps).
3
Turn the Rotary encoder to adjust the level.
Adjustable level: −6 to +6 dB
4
Press SOURCE to set the bandwidth (Q).
Adjustable bandwidth: 1, 2, 3, 4
5
To adjust another band, repeat steps 1 to 4 and adjust all
bands.
Note
While adjusting the Parametric EQ, you should consider the frequency
response of the connected speakers.
Adjusting the Graphic Equalizer Curve
You can modify the equalizer settings to create a response curve more
appealing to your personal taste. To adjust the Graphic Equalizer Curve,
set the EQ Mode to Graphic EQ. For details, refer to “Setting EQ mode
on page 19.
1
After selecting Graphic EQ from the Sound Field mode,
press BAND to select the band to be adjusted.
Band 1 Band 2 Band 3 Band 4 Band 5 Band 6
Band 7 Band 1
2
Turn the Rotary encoder to adjust the level.
Adjustable output level: −6 to +6 dB
3
To adjust another band, repeat steps 1 and 2, and then
adjust all bands.
Setting the Subwoofer Phase
Setting the Subwoofer Channel (SUBW.
Channel)
Setting EQ mode
Setting the Time Correction Unit (TCR
Parameter)
Sound Field Adjustment
Band-1 63 Hz~200 Hz
Band-2 160 Hz~1 kHz
Band-3 630 Hz~4 kHz
Band-4 1.6 kHz~10 kHz
Band-5 10 kHz~17.5 kHz
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine CDA-137BTI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine CDA-137BTI in the language / languages: English as an attachment in your email.

The manual is 4,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alpine CDA-137BTI

Alpine CDA-137BTI User Manual - German - 65 pages

Alpine CDA-137BTI User Manual - Dutch - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info