536968
18
Zoom out
Zoom in
Previous page
1/57
Next page
18-EN
Setting the MX Mode
MX (Media Xpander) makes vocals or instruments sound distinct
regardless of the music source. The CD, and iPod, will be able to
reproduce the music clearly even in cars with a lot of road noise.
1
Press SOURCE to select the source to which you want
to apply Media Xpander.
2
Press MX to switch to Media Xpander mode, and then
press ENTER.
3
Turn the Rotary encoder to select ON, and then press
ENTER.
The MX Level setting item is displayed.
4
Turn the Rotary encoder to select the MX Level, and then
press ENTER.
5
Turn the Rotary encoder to select the desired Media
Xpander level, and then press ENTER.
CD (MX level 1 to 3):
CD mode processes a large amount of data during playback. MX
takes advantage of this large data quantity to reproduce a more
clear, clean output.
CMPM (MX level 1 to 3):
This corrects information that was lost at the time of compression.
This reproduces a well-balanced sound close to the original.
DVD (Video CD) (MOVIE MX level 1 to 2):
The dialogue portion of a video is reproduced more clearly.
(DVD MUSIC):
A DVD or Video CD contains a large quantity of data such as music
clip. MX uses this data to reproduce the sound accurately.
AUX (MX level 1):
Choose the MX mode (CMPM, MOVIE, or MUSIC) that corresponds
to the media connected.
6
Press and hold for at least 2 seconds to return to
normal mode.
Notes
•If is pressed during setting, the unit returns to the previous item.
Each music source, such as CD and MP3/WMA/AAC can have its own
MX setting.
On disks with both MP3/WMA/AAC and CD-DA, when the source
changes from “MP3/WMA/AAC to CD-DA” or “CD-DA to MP3/
WMA/AAC”, MX-mode switching may delay playback slightly.
Setting to Non Effect sets MX mode of each music source to OFF.
The function is inoperable when DEFEAT is set to ON.
There is no MX mode for FM, MW and LW radio.
If an audio processor with the MX function (PXA-H800, etc.) is
connected, its own MX processing is applied to the music source. Since
the processor MX settings may not match the head unit, the audio
processor needs to be adjusted. For details, refer to the Owner’s Manual
of the audio processor.
“CMPM” is applied for MP3/WMA/AAC, Bluetooth Audio and iPod/
iPhone.
Sound Setting
You can flexibly customize the unit to suit your own preference and
usage. From the SOUND SETUP menu, Audio Setting can be modified.
1
Press and hold SOUND SETUP for at least 2 seconds to
activate the Sound Setting mode.
2
Turn the Rotary encoder to select the desired sound
setting menu, and then press ENTER.
HPF
*1
Subwoofer SUBW. System
*2
SUBW. Phase
*2
SUBW. Channel
*2
Media Xpander
*3
MX Level
*3*4
EQ Mode
TCR Parameter Sound Field
*5
HPF
*1 Adjustment cannot be performed when an external audio
processor is connected or DEFEAT is set to ON.
*2 These functions are inoperable when Subwoofer is set to OFF.
*3 Refer to “Setting the MX Mode” on page 18.
*4 This function is inoperable when Media Xpander is set to OFF.
*5 In step 2, two sound adjustment items (Parametric EQ/Graphic
EQ, T.Correction) can be selected in Sound Field Adjustment
mode, turn the Rotary encoder to select the desired item, and
then press ENTER to continue to step 3.
3
Turn the Rotary encoder to change the setting, and then
press ENTER.
(e.g. Select Subwoofer ON or Subwoofer OFF)
4
Press and hold for at least 2 seconds to return to
normal mode.
Notes
Media Xpander, Parametric EQ/Graphic EQ Adjustment, EQ Mode
and MX Level Adjustment are inoperable when DEFEAT is set to ON.
•Pressing returns to the previous Sound menu mode.
If no operation is performed for 60 seconds, Sound menu mode is
cancelled.
The High Pass Filter on this unit can be adjusted to suit your personal
taste.
Setting item: HPF
Setting contents:
OFF (Initial setting) / 60 Hz / 80 Hz / 100 Hz
When the subwoofer is on, you can adjust the subwoofer output level
(refer to “Sound Setting” on page 18).
Setting item: Subwoofer
Setting contents:
OFF / ON (Initial setting)
OFF:
No subwoofer signal is output from the Subwoofer RCA
Connectors (refer to “Connections” on page 55).
ON:
The subwoofer signal is output from the Subwoofer RCA
Connectors (refer to “Connections” on page 55).
When the subwoofer is on, you can select either System 1 or System 2 for
the desired subwoofer effect.
Setting item: SUBW. System
Setting contents:
1 (Initial setting) / 2
1:
Subwoofer level changes according to the main volume setting.
Use steps 1 to 4 to select one of the setting modes to modify.
See the applicable section below for details about the
selected setting item.
Adjusting the High Pass Filter
Turning Subwoofer ON/OFF
Setting the Subwoofer System
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine CDA-137BTI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine CDA-137BTI in the language / languages: English as an attachment in your email.

The manual is 4,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alpine CDA-137BTI

Alpine CDA-137BTI User Manual - German - 65 pages

Alpine CDA-137BTI User Manual - Dutch - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info