466971
36
Zoom out
Zoom in
Previous page
1/51
Next page
34-EN
The setting of Parametric EQ/Graphic EQ Adjustment, Time Correction
and X-Over can be adjusted in this mode.
Adjusting the Parametric Equalizer Curve
You can modify the Equalizer settings to create a response curve more
appealing to your personal taste. To adjust the Parametric Equalizer
Curve, set the EQ mode to PARAMETRIC EQ. For details, refer to
“Setting EQ mode” (page 36).
1
After selecting EQ ADJ (Parametric EQ) from the
Sound Field Adjustment mode, turn the Rotary
encoder to select the band adjustment, and then
press
/ENTER.
BAND1 BAND2 BAND3 BAND4 BAND5 BAND1
2
Turn the Rotary encoder to select an item to
adjust, then press
/ENTER.
Frequency Adjustment
3
-1 Turn the Rotary encoder to select frequency
bands.
Adjustable frequency bands:
20 Hz to 20 kHz (in 1/3 octave steps)
BAND1: 20 Hz~80 Hz (63 Hz)
BAND2: 50 Hz~200 Hz (150 Hz)
BAND3: 125 Hz~3.2 kHz (400 Hz)
BAND4: 315 Hz~8 kHz (1 kHz)
BAND5: 800 Hz~20 kHz (2.5 kHz)
Level Adjustment
3
-2 Turn the Rotary encoder to adjust the level.
Adjustable level: –6 to +6 dB
Bandwidth (Q) Adjustment
3
-3 Turn the Rotary encoder to set the bandwidth (Q).
Adjustable bandwidth: 1, 1.5, 3
4
To adjust another band, repeat steps 1 to 3 and
adjust all bands.
The frequencies of adjacent bands cannot be adjusted within 4 steps.
While adjusting the Parametric EQ, you should consider the
frequency response of the connected speakers.
Adjusting the Graphic Equalizer Curve
You can modify the equalizer settings to create a response curve more
appealing to your personal taste. To adjust the graphic equalizer curve,
set the EQ mode to GRAPHIC EQ. For details, refer to
“Setting EQ
mode” (page 36).
1
After selecting EQ ADJ (Graphic EQ) from the Sound
Field Adjustment mode, turn the Rotary encoder
to select the band adjustment, and then press
/ENTER.
BAND1 BAND2 BAND3 BAND4 BAND5
BAND6 BAND7 BAND1
BAND-1 (63 Hz) / BAND-2 (150 Hz) / BAND-3 (400 Hz) /
BAND-4 (1 kHz) / BAND-5 (2.5 kHz) / BAND-6 (6.3 kHz) /
BAND-7 (17.5 kHz)
2
Press /ENTER to activate the level adjusting
mode.
3
Turn the Rotary encoder to adjust the level.
Adjustable output level: –6 to +6 dB
4
To adjust another band, repeat steps 1 to 3, and then
adjust all bands.
Adjusting the Time Correction
Before performing the following procedures, refer to About Time
Correction” (page 37).
1
After selecting TIME CORRECTION from the Sound
Field Adjustment mode, turn the Rotary encoder
to select the band adjustment, and then press
/ENTER.
2.2ch (3WAY) System
4.2ch (FRONT/REAR/SUBW.) System
2
Press /ENTER to activate the Time Correction
input mode.
3
Turn the Rotary encoder to adjust the distance (0.0
to 336.6 cm).
L = (distance to farthest speaker) – (distance to other
speakers)
Refer to “Time Correction Value List” on page 37.
4
Repeat steps 1 to 3 to set another speaker.
Set these values to achieve simultaneous sound
propagation to the listening position.
Sound Field Adjustment
FC LV Q FC
(frequency) (level) (bandwidth) (frequency)
F-L (Initial setting)
F-R R-L R-R
(Mid-L) (Mid-R) (High-L ) (High-R)
SW-L SW-R F-L
(Mid-L)
F-L (Initial setting)
F-R R-L R-R
(Front-L) (Front-R) (Rear-L) (Rear-R)
SW-L SW-R F-L
(Front-L)
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine CDA-118M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine CDA-118M in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 3,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info