Manual Alpina SH 2500 (page 21 of 25) (All languages)

731996

Zoom out

Zoom in

1/25

3.4

Emptying the box

Make sure the shredded material in the collection box do-

esn’t reach too high a level; if this happens, the shredded

material could clog the discharge chute, causing material

to back up through the feed opening.

To remove or empty the box, turn o the motor, lower the

safety handle (1) and take out the box (2).

3.5

Clogging of material

If material to be shredded becomes clogged, you can free

the shredding roller by reversing the rotation direction of

the motor . Therefore:

– reverse the rotation direction by pushing the black but-

ton (4-▲), taking care that material does not back up

from the feeding chute;

– a led (5) lights up to indicate that rotation is in the op-

posite direction.

– when you have unblocked the material, press the black

button (3-▼) to restore the operating rotation direction.

Stop the motor and disconnect from the mains supply if

you must unclog the chute and the material discharge

chute.

3.6

End of work

When you have nished work, stop the motor by pres-

sing the red button (2-O).

Disconnect the extension lead (11) BEFORE the general

mains socket (13) THEN from the machine plug (12).

Remove and empty the container.

4. STORAGE AND MAINTENANCE

IMPORTANT - Routine and accurate maintenance is

essential in maintaining original machine safety and

performance levels.

Store the machine in a dry place.

Disconnect the machine from the mains supply

before starting any cleaning, inspection or mainte-

nance activities.

1) Wear sturdy work gloves before cleaning, maintaining

or adjusting the machine.

2) After each use, remove the collection box and clean

the remaining debris in the discharge chute.

3) After each use, spray a light layer of biodegradable

oil on the shredding roller to protect the metal from

corrosion.

4) Always make sure the air vents are free of debris.

5) Do not spray water onto and avoid wetting the motor

and electrical components. Do not use harsh liquids to

clean plastic parts.

6) Do not attempt to carry out demanding repairs without

the necessary means and technical knowledge. All

work on the machine that is poorly executed automa-

tically voids the Warranty, releasing the Manufacturer

of all liability.

4.1

Distance adjustment

The distance between the pressure plate (2) and shred-

ding roller (3) must be adjusted before using the machine

for the rst time. Afterwards, it is necessary only when

shredding proves to be imperfect.

In order to set the plate (2) in an optimal position with

regard to the roller (3), you must:

– start up the motor to activate the shredding roller (3);

– turn the handwheel (1) slowly clockwise to bring the

plate (2) closer to the roller until you hear a scraping

sound between the two parts, demonstrated by small

metal shavings falling from the discharge chute.

Avoid excessive contact in order to prevent unnecessary

wear to the plate.

5. ENVIRONMENTAL PROTECTION

Environmental protection should be a priority of conside-

rable importance when using the machine, for the benet

of both society and the environment in which we live.

– Avoid causing any disturbance to the surrounding area.

– Scrupulously comply with local regulations for the di-

sposal of waste materials after working.

– Scrupulously comply with local regulations for the di-

sposal of packaging, deteriorated parts or any elements

with a strong environmental impact; this waste must not

be disposed of as normal waste, but must be separated

and taken to specied waste disposal centres where

the material will be recycled.

– When decommissioning, do not abandon the machine

in the environment, but hand it over to a disposal cen-

tre, in accordance with the local regulations in force.

For any doubts or problems, please do not hesitate to

contact your nearest Customer Service Centre or Your

Dealer.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Alpina SH 2500 in the language / languages: All languages as an attachment in your email.

The manual is 1,64 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Alpina SH 2500 Manual

Product: