541415
89
Zoom out
Zoom in
Previous page
1/114
Next page
AT-S7/AT-S9 Operations Manual
77
An image file uses a binary format. Configuration data uses an ASCII format.
The switch, however, has the ability to differentiate between the two formats
and, once differentiated, accepts and places this data in the correct place.
NOTE
Not all configuration fields apply to all products. This file includes
configuration data for AT-S7 (4016 with PVC’s), AT-S6 (3690), AT-S9 (TS95)
with PVC’s and AT-S13(4016 with SVC’s). Exceptions are noted.
Get
To obtain a current image for an AT-4016TR/AT-4016F or AT-TS95TR
respectively, enter either:
tftp get image.s7 123.0.0.5 ATS7 octet
tftp get image.s9 123.0.0.5 ATS9 octet
The switch will respond to a TFTP “get” request by transferring an image file
of the software currently executing in that unit to the requesting host. This
enables you to download the software onto another host system.
The switch will respond to a TFTP “get” request by transferring a binary
image of the software currently executing in that unit to the requesting host.
This enables you to upload the software onto the host system. The host
computer should then save the uploaded binary program image into a file
without otherwise modifying it in any way.
When you receive a “get” file from a device that has had its default
configuration values changed, you receive only those parameters, not the
entire configuration.
Put
A TFTP configuration field “put” file involves the use of any, or all,
configuration parameters.
To download the image file for an AT-4016 or AT-TS95TR respectively:
tftp put image.s7 123.0.0.5 ATS7 octet
tftp put image.s9 123.0.0.5 ATS9 octet
Once the file is placed on the switch, downloading procedures are initiated.
The switch responds to a TFTP ‘put’ request by accepting program data from
the sending host. The system will write the new program image into its non-
volatile memory. When the TFTP session is complete, the system will reboot
itself and begin executing the new program.
NOTE
The switch will not accept a TFTP “put” request if a PCMCIA card or
Firmware Cassette is installed.
89


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allied Telesis AT-S7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allied Telesis AT-S7 in the language / languages: English as an attachment in your email.

The manual is 1,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info