541402
23
Zoom out
Zoom in
Previous page
1/50
Next page
AT-GS950/8, AT-GS950/16, and AT-GS950/24 Switches Installation Guide
23
Table 4 describes the LEDs for the SFP slots.
Note
All of the port LEDs will be off when the switch is operating in the low
power mode. To toggle on the LEDs, use the eco-friendly button.
eco-friendly Button
The eco-friendly button serves multiple functions. You can toggle the port
LEDs on and off, reboot your switch or reset your switch configuration to
factory default values.
The button operates as follows:
eco-Friendly mode - When you press the eco-friendly
button for 1 to 4 seconds, the front panel port LEDs are
either enabled or disabled. You may use the button to
turn off (disable) the LEDs when you are not
monitoring the switch. Toggling the LEDs does not
interfere with the network operations of the switch. The
eco-friendly button does not control the Power LED.
Reboot the switch - By pressing the button for 5 to 9
seconds, you can initiate a software reboot of the
switch.
Table 4. SFP Slot LEDs
LED State Description
L/A (link/
activity)
Off The port on the SFP transceiver has not
established a link with an end node or the
transceiver slot is empty.
Blinking
Green
The SFP transceiver is transmitting or
receiving network packets at 1000 Mbps.
Steady
Green
The SFP transceiver has established a link
with a network device at 1000 Mbps, but is
not transmitting or receiving network
packets.
Blinking
Amber
The SFP transceiver is transmitting or
receiving network packets at 100 Mbps.
Steady
Green
The SFP transceiver has established a link
with a network device at 100 Mbps, but is not
transmitting or receiving network packets.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allied Telesis AT-GS950-8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allied Telesis AT-GS950-8 in the language / languages: English as an attachment in your email.

The manual is 1,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info