Manual Allied Telesis AT-AR256E v3 (page 47 of 58) (English)

541394

Zoom out

Zoom in

1/58

AT-AR256E v3 4 Ports ADSL2/2+ Router User Manual 47

The following fields can be configured for Policy Routing:

• Destination IP address/mask

• Source IP address/mask

• Source MAC address

• Protocol (TCP, UDP, ICMP, etc)

• Source port

• Destination port

• Incoming interface

• DSCP

Routing

Static Routing

If the router is connected to more than one network, you may need to set up a static route between them.

A static route is a pre-defined pathway that network information must travel to reach a specific host or

network. You can use static routing to allow different IP domain users to access the Internet through the

router.

Figure 39: Static Routing

The New Destination IP is the address of the remote LAN or host to which you want to assign a static route.

Enter the IP address of the host for which you wish to create a static route here. For a standard Class C IP

domain, the network address is the first three fields of the New Destination IP, while the last field should be

0. The Subnet Mask identifies which portion of a IP address is the network portion and which portion is the

host portion. For a full Class C Subnet, the Subnet Mask is 255.255.255.0. The Gateway IP address should be

the IP address of the gateway device that allows for contact between the Gateway and the remote network

or host.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Allied Telesis AT-AR256E v3 in the language / languages: English as an attachment in your email.

The manual is 1,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Allied Telesis AT-AR256E v3 Manual

Product: