541394
46
Zoom out
Zoom in
Previous page
1/58
Next page
46 AT-AR256E v3 - 4 Ports ADSL2/2+ Router - User Manual
Field Description
Ingress Inter
face
The incoming traffic interface for a Policy Routing rule. Selections include LAN
interfaces, WAN interfaces, Locally generated (traffic) and not applicable. Examples
of Locally generated traffic are: voice packets, packets generated by applications such
as DNS, DHCP, etc.
Destination
Interface
The outgoing traffic interfaces for a Policy Routing rule. Selections include LAN
Interfaces and WAN interfaces.
DiffServ Code
Point
The DiffServ Code Point (DSCP) field value ranges from 1 to 255. This field cannot be
configured alone, additional fields like IP, Source MAC and/or Ingress Interface
should be configured.
Class of Service The selections are (in the order of priority): CoS1, CoS2, CoS3, CoS4, CoS5, CoS6
and N/A.
Source IP The IP address of the traffic source.
Mask The source IP Netmask. This field is required if the source IP has been entered.
Destination IP The IP address of the traffic destination.
Mask The Netmask of the destination. This field is required if the destination IP has been
entered.
Protocol The selections are TCP, UDP, ICMP, Specify and none. If you choose Specify, you
need to enter the protocol number in the box next to the Protocol field. This field
cannot be configured alone, additional fields like IP, Source MAC and/or Ingress
Interface should be configured. This field is also required if the source port or
destination port has been entered.
Source Port The source protocol port. You cannot configure this field without entering the
protocol first.
Destination
Port
The destination protocol port or port range. You cannot configure this field without
entering the protocol first.
Source MAC The MAC address of the traffic source.
Local Routing
MAC
This field is enabled only when Locally Generated is selected in the Ingress Interface
field. The mark for DNS traffic generated by different applications are described
below:
Dynamic DNS: 0xE1
Dynamic Proxy: 0xE2
Web Server: 0xE3
MSNTP: 0xE4
DHCP Server: 0xE5
IP tables Utility: 0xE6
PPP Deamon: 0xE7
IP Route: 0xE8
ATM Library: 0xE9
NET Tools: 0xEA
RIP: 0xEB
RIP v2: 0xEC
UPNP: 0xEE
Busybox Utility: 0xEF
Configuration Manager: 0xF0
DropBear Utility: 0xF1
Voice: 0
Currently routing algorithms make decision based on destination address, i.e. only Destination IP address
and subnet mask is supported. The Policy Routing page enables you to route packets on the basis of various
fields in the packet.
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allied Telesis AT-AR256E v3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allied Telesis AT-AR256E v3 in the language / languages: English as an attachment in your email.

The manual is 1,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info