The AT-9724TS has two levels of memory;normal RAM and non-volatile or NV-RAM.Configuration changes are made effective clicking the Apply button.When
this is done,the settings will be immediately applied to the switching software in RAM,and will immediately take effect.
Some settings,though,require you to restart the Switch before they will take effect.Restarting the Switch erases all settings in RAM and reloads the stored
settings from the NV-RAM.Thus,it is necessary to save all setting changes to NV-RAM before rebooting the switch.
To retain any configuration changes permanently,click on the
Savebutton in the Save Changes page,as shown below.
Figure 10- 8.Save Changes Screen
The Switch has three levels of save,which are as follows:
ParameterDescription
Save (Only save config)
Clicking the radio button for this entry will save only the current switch configuration to NV-RAM.
Save Log (Only save log)Clicking the radio button for this entry will save only the current current log file to NV- RAM.
Save All (Save config and log)Clicking the radio button for this entry will save both the current switch configuration and the current log file
to NV-RAM.
These settings will be used every time the Switch is rebooted.See the
Resetsection for more information on changing configurations saved to NV-RAM.
10-6 Reset
The R
eset
function has se
veral options when resetting the Switch.Some of the current configuration parameters can be retained while resetting all other
configuration parameters to their factory defaults.
Note:
Only the
R
eset System
option will enter the factor
y default parameters into the Switch’s non-volatile RAM,and then restart the Switch.
All other options enter the factory defaults into the current configuration,but do not save this configuration.
Reset Systemwill return the Switch’s
configuration to the state it was when it left the factory.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Allied Telesis AT-9724TS at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Allied Telesis AT-9724TS in the language / languages: English as an attachment in your email.
The manual is 8,71 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
