541393
187
Zoom out
Zoom in
Previous page
1/197
Next page
Figure 10- 5.Firmware Information window
This window holds the following information:
Parameter Description
BOX
States the stacking ID number of the switch in the switch stack.
ID States the image ID number of the firmware in the Switch’s memory.The Switch can store 2 firmware images
for use.Image ID 1 will be the default boot up firmware for the Switch unless otherwise configured by the user.
Version States the firmware version.
Size States the size of the corresponding firmware,in bytes.
Update Time States the specific time the firmware version was downloaded to the Switch.
From States the IP address of the origin of the firmware.There are four ways firmware may be downloaded to the
Switch.
R – If the IP address has this letter attached to it,it denotes a firmware upgrade through the Console Serial
Port (RS-232).
T – If the IP address has this letter attached to it,it denotes a firmware upgrade through Telnet.
S – If the IP address has this letter attached to it,it denotes a firmware upgrade through the Simple Network
Management Protocol (SNMP).
W – If the IP ad
dr
ess has this letter attached to it,it denotes a firmware upgrade through the web-based
management interface.
User States the user who downloaded the firmware.This field may read “Anonymous” or “Unknown” for users that
are not identified.
Config Firmware Image
The Config Firmware Image window allows users to configure firmware images saved in the memory of the Switch.To access the following window,click
Maintenance > MULTIPLE IMAGE Services > Config Firmware Image.
Figure 10- 6.Config Firmware Image window
186
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch
187


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allied Telesis AT-9724TS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allied Telesis AT-9724TS in the language / languages: English as an attachment in your email.

The manual is 8,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info