Trivial File Transfer Protocol(TFTP) services allow the Switch’s firmware to be upgraded by transferring a new firmware file from a TFTP server to the
Switch.A configuration file can also be loaded into the Switch from a TFTP server,switch settings can be saved to the TFTP server,and a history log can be
uploaded from the Switch to the TFTP server.
Download Firmware
To update the Switch’s firmware,open the TFTP Services folder in the Maintenance folder and then click the Download Firmware link:
Figure 10- 1.Download Firmware window
Unit ID – Select which switch of a switch stack you want to update the firmware on.This allows the selection of a particular switch from a switch stack if you
have installed the optional stacking module and have properly interconnected the switches.
All indicates all switches in a switch stack will download the same
firmware.
Enter the IP address of the TFTP server in the
Server IP Addressfield.
Select the Image ID of the firmware.The AT-9724TS can hold two firmware images in its memory.Image ID 1 will always be the boot up firmware for the Switch
unless specified by the user.Information on configuring Image IDs can be found in this section,under the heading
MULTIPLE IMAGE Services.
The TFTP server must be on the same IP subnet as the Switch.
Enter the path and the filename to the firmware file on the TFTP server.Note that in the above example,the firmware file is in the root directory of the D drive
of the
TFTP server.
The
TFTP server must be running TFTP server software to perform the file transfer.TFTP server software is a part of many network management software
packages – such as NetSight,
or can be obtained as a separate pr
ogram.
Click Star
t to r
ecord the IP address of the TFTP server and begin the file transfer.
Do
wnl
oad Configuration File
T
o do
wnload a configuration file from a TFTP server,click on the
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Allied Telesis AT-9724TS at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Allied Telesis AT-9724TS in the language / languages: English as an attachment in your email.
The manual is 8,71 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
