Current Box IDThe current Box ID of the Master switch in the stack.
New Box IDThe new box ID of the Master switch in the stack.
Box TypeThe user may choose the model name of the Master switch in a stack to be the main configuring switch of that
stack.
PriorityDisplays the priority ID of the Switch.The lower the number,the higher the priority.The box (switch) with the
lowest priority number in the stack is the Master switch.
Information configured in this screen may be found in the
Monitoring folder under Stack Information.
6-4 Port Configuration
This section contains information for configuring various attributes and properties for individual physical ports,including port speed and address learning.Clicking
on Port Configurationsin the Configuration menu will display the following window for the user:
Figur
e 6- 5.
Port Configuration and The Port Information Table window
T
o configur
e switch por
ts:
1.Choose the port or sequential range of ports using the From…To… port pull-down menus,and the Unit ID of the Switch to be configured.
2.Use the remaining pull-down menus to configure the parameters described below:
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Allied Telesis AT-9724TS at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Allied Telesis AT-9724TS in the language / languages: English as an attachment in your email.
The manual is 8,71 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
