Manual Allied Telesis AT-8000-8POE (page 339 of 360) (English)

541404

339

Zoom out

Zoom in

1/360

AT-S63 Management Software Menus Interface User’s Guide

Section III: Using the Command Line Interface 339

Port Mirroring Example

To configure port 8 as the mirroring port and port 6 as the mirrored port you

need to first access the Interface Configuration mode, specify the port, and

then configure the port mirroring feature. Perform the following procedure.

1. From the User EXEC mode, enter:

enable

You now have access to the Privileged EXEC Configuration mode

as indicated by the Switch(config)# prompt.

2. From the Privileged EXEC Configuration mode, enter:

configure

You now have access to the Global Configuration mode as

indicated by the Switch(config)# prompt.

3. Access port 8 on the Interface Configuration mode:

interface Ethernet1/8

You now have access to the Interface Configuration mode as

indicated by the Switch(config-if)# prompt.

4. Enter the port mirroring command, making port 6 the mirrored port:

Switch# port mirror 6

PING Pings a specified IP address to check connectivity to

another system.

PORT Sets port mirroring parameters.

PVID Sets the PVID.

SHUTDOWN Disables a port.

SPANNING-

TREE

Sets the parameters for the STP feature.

SPEED-

DUPLEX

Sets the speed and duplex mode for a port.

Table 15. Interface Configuration Command Mode Commands

Commands Description

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Allied Telesis AT-8000-8POE in the language / languages: English as an attachment in your email.

The manual is 5,72 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Allied Telesis AT-8000-8POE Manual

Product: