Manual Allied Telesis AT-4016F (page 65 of 114) (English)

541413

Zoom out

Zoom in

1/114

AT-S7/AT-S9 Operations Manual

Terminal Configuration

Choose the System Administration submenu.

Enter the letter T for Terminal Configuration to access the following

submenu:

Presently conﬁgured (or default) options are highlighted with an arrowhead

(“>”).

Changes to the conﬁgured terminal characteristics (terminal type and

half/full duplex) take effect immediately. For example, changing from half

duplex to full duplex will cause the management agent to begin echoing your

input immediately. The management agent “remembers” all changes and

retains them in the event of a power failure.

Any changes to serial interface options (data bits, stop bits, parity, data rate)

are “remembered,” but do not take effect until the next management agent

session; i.e., you must select

Quit from the Main Menu and then press RETURN

to begin a new session. When you are connected to the management agent

through a virtual circuit connection, these serial interface options have no

effect; they will, however, affect any later sessions with a directly connected

terminal.

ANSI—ANSI “auto configures” the management agent in accordance with the

requirements of an ANSI-standard terminal (essentially the same as a DEC

VT-100 or one of the multitude of terminals emulating the VT-100). ANSI is

also used if you want your screen to be continuously updated.

Generic—The Generic terminal option configures the management agent

for the lowest common denominator terminal. In this conﬁguration, the

management agent makes very few assumptions about the terminal’s

capabilities and is compatible with almost all terminals.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Allied Telesis AT-4016F in the language / languages: English as an attachment in your email.

The manual is 1,25 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Allied Telesis AT-4016F Manual

Product: