Manual Allied Telesis AT-4016F (page 64 of 114) (English)

541413

Zoom out

Zoom in

1/114

Ethernet Administration

You may enter a new name, up to 20 characters in length, or press RETURN to

keep the existing symbolic name. To delete an existing name, enter one or

more space characters (blanks) and then press RETURN.

Ethernet Parameters

The AT-4016 as well as the AT-TS95TR, offer the choice of store-and-forward

(the default) or cut-through switching strategies. In store-and-forward, the

AT-4016 stores the entire packet before it is forwarded.

Error packets which do not have a valid Ethernet length will be discarded

using store-and-forward but not with cut-through. Due to this software

implementation, there is a minimal latency difference between cut-through

and store-and-forward. The preferred method is store-and-forward.

Choose the System Administration submenu again and enter the letter E

for Ethernet parameters to access the following submenu:

NOTE

All changes to Ethernet parameters require a system reset to be activated.

The Ethernet parameters screen shows the current choices for

forwarding and for LED modes of operation. At the bottom you see a list of

menu options. Each currently conﬁgured choice is highlighted with an

arrowhead (“>”).

Enter the letter

S or the letters CU if you wish to change the forwarding

mode. Enter the letter T or the letters CO if you wish to change the LED

mode.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Allied Telesis AT-4016F in the language / languages: English as an attachment in your email.

The manual is 1,25 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Allied Telesis AT-4016F Manual

Product: