541413
34
Zoom out
Zoom in
Previous page
1/114
Next page
Getting Started
22
The VPI screen is shown below and is accessed, of course, from the System
Administration submenu.
To use the LAN emulation capabilities of ATM, you establish logical identities
for LANs, paths, channels, and MAC-addressed nodes on your network(s).
Virtual Path Identifier. The Virtual Path Identifier (VPI) for the
AT-TS95TR is set in the LAN Emulation menu (PVC definitions).
Virtual Channel Identifiers. Virtual Channel Identifiers (VCIs) are also
defined in the LAN Emulation menu (PVC definitions). There are 992 VCIs
available between 32 and 1,024 (VCIs between 1 and 31 have been reserved
for ATM management cell purposes). These are used by ATM in the cell
header to direct packets to their correct destinations. (You can also use the
LAN Emulation menu to assign ELAN membership to nodes.)
LAN Emulation Menu
This release implements multiple Emulated LANs. Although each switch can
support up to 64 Emulated LANs, each Emulated LAN requires its own PVC
between units.
Use the LAN Emulation menu to set up Emulated LANs as follows:
1. Ensure that the VPI is set to zero (
Ø) in the ATM parameters option
within the System Administration Menu (Ø is the only VPI that is
supported at this time).
Once the ATM parameters are established, you are ready to configure
Emulated LANs.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allied Telesis AT-4016F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allied Telesis AT-4016F in the language / languages: English as an attachment in your email.

The manual is 1,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info