541413
32
Zoom out
Zoom in
Previous page
1/114
Next page
Getting Started
20
From the System Administration submenu enter the letters AT for ATM
parameters to access the following submenu:
This submenu enables you to determine the values that regulate your ATM
network. The top part of the display shows the current values.
The following variables can be configured:
Sonet/SDH Two options are available for the Fiber Optic ATM interface: Synchronous
Optical Network (SONET) STS-3c-type framing (which is more common in
North America) and Synchronous Digital Hierarchy (SDH-1) framing (which
is more common in other countries). The default is SONET. Whichever option
you choose should remain consistent throughout the entire network.
Clocking The options are either Internal or External. Since the clock signal is normally
supplied by the ATM switch itself, the default is External (loop). Only one
switch in the network should provide clocking.
Cells The ATM specification requires the station to transmit null cells during
periods without traffic. This parameter determines whether these null cells
are either Idle or Unassigned. The default is Unassigned cells and will be
displayed within the Cell statistics submenu.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allied Telesis AT-4016F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allied Telesis AT-4016F in the language / languages: English as an attachment in your email.

The manual is 1,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info