541399
16
Zoom out
Zoom in
Previous page
1/134
Next page
where:
ipadd is an unused IP address on your LAN.
mask is the subnet mask (for example 255.255.255.0)
If IP addresses on your LAN are assigned dynamically by DHCP, you can set
the router to request an IP address from the DHCP server, using the
commands:
ADD IP INTERFACE=vlan1 IPADDRESS=DHCP
ENABLE IP REMOTEASSIGN
You do not need to set the MASK parameter because the subnet mask received
from the DHCP server is used.
If you use DHCP to assign IP addresses to devices on your LAN, and you want to
manage the router within this DHCP regime, it is recommended that you set your
DHCP server to always assign the same IP address to the router. This will enable you
to access the GUI by browsing to that IP address, and will also let you use the router as
a gateway device for your LAN. If you need the router's MAC address for this, it can be
displayed using the command SHOW SWITCH or SHOW ETH=x MACADDRESS.
Similarly, for the default WAN Ethernet port (eth0) use the command:
ADD IP INTERFACE=eth0 IPADDRESS=ipadd MASK=mask
where ipadd is the globally-unique IP address that your ISP has assigned to
you.
For the default DMZ interface on the AR450S, use the command:
ADD IP INTERFACE=eth1 IPADDRESS=ipadd MASK=mask
where ipadd is an unused private or public IP address.
The default DMZ interface on the AR410 or AR410S is vlan2, which contains
port 3. Therefore connect your DMZ server/s to the router’s switch (network)
port 3 and give vlan2 an IP address, using the command:
ADD IP INTERFACE=vlan2 IPADDRESS=ipadd MASK=mask
where ipadd is an unused private or public IP address.
To protect servers on your DMZ (or LAN), you need to configure the firewall (see the
Firewall chapter in the Software Reference, especially the Configuration Examples). A
special feature licence is required but is enabled by default on the AR410S and AR450S.
To change the IP address for an interface, enter the command:
SET IP INTERFACE=interface IPADDRESS=ipadd MASK=ipadd
When you are configuring the router remotely, if you change the configuration (for
example, the VLAN membership) of the port over which you are configuring, the router
is likely to break the connection.
For more information about switch ports and Virtual LANs (VLANs), see
Chapter 5, Physical and Layer 2 Interfaces in this document, and Switching on the
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allied Telesis AR440S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allied Telesis AR440S in the language / languages: English as an attachment in your email.

The manual is 1,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info