541399
14
Zoom out
Zoom in
Previous page
1/134
Next page
14 AR400 Series Router User Guide
Software Release 2.7.1
C613-02021-00 REV F
Connecting a Terminal or PC
The first thing to do after physically installing the router is to start a terminal or
terminal emulation session to access the router. Then you can use the
command line interface (CLI) to configure the router. If you wish to configure
the router using the Graphical User Interface, you must first access the CLI and
assign an IP address to at least one interface.
You can use a PC running terminal emulation software as the manager console
instead of a terminal. Many terminal emulation applications are available for
the PC, but the most readily available is the HyperTerminal application
included in Microsoft® Windows™ 95, Windows™ 98, and Windows™ 2000.
In a normal Windows™ installation HyperTerminal is located in the
Accessories group. In Windows™ 2000, HyperTerminal is located in the Start >
Programs > Accessories > Communications menu.
The key to successfully using terminal emulation software with the router is to
configure the communications parameters in the terminal emulation software
to match the default settings of the console port on the router. For instructions
on how to configure HyperTerminal, see the Hardware Reference.
To start a terminal session, connect to the router in one of the following ways:
Connect a VT100-compatible terminal to the RS-232 Terminal Port (asyn0),
set the communications parameters on the terminal (Table 1 on page 14),
and press [Enter] a few times until the router login prompt appears; OR
Connect the COM port of a PC running terminal emulation software such
as Windows Terminal or HyperTerminal to the RS-232 Terminal Port
(asyn0), set the communications parameters on the terminal emulation
software (Table 1 on page 14), and press [Enter] a few times until the router
login prompt appears.
Terminal Communication Parameters
Check that the terminal or modem’s communication settings match the settings
of the asynchronous port. By default, the asynchronous port (also known as the
Console, RS-232, or Config port) on the router is set to the parameters shown in
Table 1:
Refer to the user manual supplied with the terminal or modem for details of
how to change the communications settings for the terminal or modem.
Table 1: Parameters for terminal communication
Parameter Value
Baud rate 9600
Data bits 8
Parity None
Stop bits 1
Flow control Hardware
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allied Telesis AR440S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allied Telesis AR440S in the language / languages: English as an attachment in your email.

The manual is 1,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info