541357
20
Zoom out
Zoom in
Previous page
1/32
Next page
Allen & Heath 20 ZED-10FX User Guide
STEREO INPUT CHANNEL 1
+10
+6
-15
+15
-15
+15
Record
0
LR
+6
0
Listen
BAL
AUX
FX
LF
HF
0
LEVEL
FX send
This controls the level of signal that is sent to the effects
processor from the stereo channel. The signal is post-level
which means it is affected by the channel Level control (so
it stays in proportion to the signal going to Mix) and the
send control has 6dB gain fully clockwise.
There is no master level control for the FX bus.
AUX send
Controls the level of signal sent to the Auxiliary output
from the stereo channel. The signal is sourced pre-Level so
is independent of the level being sent to the main L-R Mix.
The send control has +6dB gain fully clockwise and unlike
the FX bus, there is a master level control for the Aux
output.
Balance
The balance control adjusts the relative level between the
left and right stereo signals as they are sent to the stereo
buses and subsequently the main stereo outputs. Set to the
mid position, equal amounts of signal are fed to left and
right, with Bal set to L, none is sent to the Right bus.
LEVEL
The rotary Level or fader controls the amount of signal to
the left & right buses, Record bus and to the FX send con-
trol. There is 10dB of gain fully clockwise and the unity
gain position is marked by “0”.
Record
Switches the channel signal to a separate stereo bus called
Record. The Bal and Level controls affect the Record signal
and the channel Mix L-R signal remains unaffected by this
switch.
Listen
Switches the channel signal to the headphones or monitor
output circuit for checking the channel signal. Takes the
signal after the EQ but before the Level control (so you can
check the signal before adding it to Mix or Record)
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath ZED-10FX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath ZED-10FX in the language / languages: English as an attachment in your email.

The manual is 2,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info