541357
18
Zoom out
Zoom in
Previous page
1/32
Next page
Allen & Heath 18 ZED-10FX User Guide
Hi Z
- 10 10
20
40
60
40
0
GM
Mic
GTR 1
Hi
G
T
HPF
GAIN
G
MONO INPUT CHANNEL 3 & 4
Hi Z input
The only difference between mono inputs 1-2 and 3-4 is
the Hi Z inputs for guitars or other instruments.
Standard 1/4” (6.25mm) Jack socket for unbalanced line
level signals or instrument pickups. Wired Tip=Hot(+),
Ring=cold (-), Sleeve=Chassis.
The Hi Z input connects to the XLR input through a cir-
cuit, so be aware that the two signals will add together if
both inputs are plugged in simultaneously.
The Hi Z input can be used with normal line level signals
but is designed specifically to match signals from instrument
pickups. The input impedance is extremely high (10Mohms)
and a FET (Field Effect Transistor) running in Class A mode
emulates the type of circuits used in valve guitar combos or
head amplifiers. The input circuit has soft asymmetric over-
drive characteristics, giving a warm 2nd harmonic character
to the sound if required.
AC MAINS IN ~
100 - 240V~ 47-63Hz 15W
ALLEN&HEATH
OFF
0 I
ON
Serial No.
ENGINEERED IN ENGLAND BY ALLEN & HEATH LIMITED. MADE IN CHINA
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
DO NOT OPEN
CAUTION
RISK OF ELECTRIC SHOCK
AVIS: RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR.
WARNING: T HIS APPARATUS MUST BE EARTHED
(2) this devi ce must accept any int erference received,
This device c omplies with Part 15 of the FC C Rules.
(1) this device may not cause harmful interference, and
Operation is su bject to the foll owing two conditions:
including interference that may cause undesired operation.
Laite on liitettävä suojamaadoituskoskettimilla varustettuun pistorasiaan
Apparatet må til koples jordet stikkontakt
Apparaten skall anslutas till jordat uttag
CET APPAREIL DOIT ETRE MIS A LA TERRE
Guitar input gain switches
Unity gain
High gain (+26dB)
Main Out put Level
0dBu
-30dBu
Gain Boost
A recessed switch on the rear panel allows the HI Z input to be boosted by 26dB, useful
for instruments with weak pickups or where more overdrive is required. When the XLR
is being used or for normal line level signals (like keyboards)—make sure the switch is in
the OUT position.
0.00 ms 0.20 0.40 0.60 0.80 1.00 1.20 1. 40 1.60 1.80 1. 99
-4.35
-2.18
0.00
2.18
4.35
V
0.00 ms 0.20 0. 40 0.60 0.80 1.00 1.20 1.40 1.6 0 1.80 1.99
-4.35
-2.18
0.00
2.18
4.35
V
Hi Z Input GAIN BOOST OUT Hi Z Input GAIN BOOST IN
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath ZED-10FX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath ZED-10FX in the language / languages: English as an attachment in your email.

The manual is 2,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info