Manual Allen-Heath Xone 92 (page 12 of 40) (English)

541350

Zoom out

Zoom in

1/40

12 XONE:92 User Guide

14 Changing the crossfader curve. The control knob to

the left of the crossfader sets the crossfader curve. In the

normal fully anticlockwise position the signal dips by 5dB at the

middle position for smooth fading between tracks. Turn the

knob clockwise gradually for an increasingly dipless response;

whereby the signal starts to dip only once the fader has passed

the mid position. This is better suited to scratch or cut mixing

where you layer the sounds.

15 Crossfader mixing. At this point you may wish to plug

in a pair of turntables and experiment with DJ mixing. Plug into

stereo channel 1 and channel 2 phono inputs if your turntables

require RIAA equalisation. If not, plug into the line inputs.

Remember to connect the turntable earth leads to the console

chassis earth terminal. Use CUE to set up the channel level as

you did in step 7. Route channel 1 to X and channel 2 to Y of

the crossfader.

16 Adding VCF filter effects. Each side of the crossfader

features a stereo Voltage Controlled Filter which presents the

DJ with a unique set of live performance tools to create subtle

or startling tonal effects. Route the channel to either of the two

filters using the three way toggles; push the toggle to the left for

filter 1 and to the right for filter 2. Activate the filter by pressing

the FILTER ON switch. The blue led light-pipe lights to show

that the filter is active. Check that the large LPF switch is

illuminated indicating that the power up default lo-pass filter

type is active. The sound should change to a rumbling bass

line with higher frequencies removed.

17 Sweep the filter frequency. Turn the FREQ control

clockwise and you should progressively hear higher audio

frequencies returning to the mix. This control sweeps the effect

from low to high frequency.

18 Adjust the filter resonance. Slowly turn the

RESONANCE control clockwise as you sweep the frequency

and you should hear the ‘Q’ or ‘sharpness’ of the effect

changing from subtle to drastic as the roll-off knee sharpens

and frequency boost is added.

Increasing resonance boosts a narrow band of

selected frequencies. Make sure you reduce the channel

gain if the red peak meters start to flash.

19 Change the filter type. Press one or any combination of

the large HPF, BPF and LPF filter type switches to experiment

with different performance effects. For example pressing HPF

and LPF together produces a notch effect. Once you are

familiar with the creative power of these filters you can apply

them to your performance. More information is available later.

Now…continue to read through the rest of this User Guide.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath Xone 92 in the language / languages: English as an attachment in your email.

The manual is 3,48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Allen-Heath Xone 92 Manual

Product: