Manual Allen-Heath Xone 92 (page 11 of 40) (English)

541350

Zoom out

Zoom in

1/40

XONE:92 User Guide 11

8 Check the sound using the Cue system. With the music

playing press the large CUE switch. The switch lights as well

as the CUE ACTIVE led to show that the cue monitor is active.

The channel signal is now sent to the headphones. Slowly turn

up the headphones level control until you hear the music.

Avoid listening to loud headphones levels for long

periods as this may damage your hearing.

The channel signal is now displayed on the main monitor

meters. Note that the cue system lets you monitor the channel

signals pre-fader. In other words you can check or cue any

source before you raise its fader to bring it into the mix.

9 Route the signal to the main Mix 1 output. Release the

CUE switch. The CUE light-pipe turns off and the headphones

and monitor meters go quiet. Raise stereo channel 1 fader to

its top position. With the XFADE toggle switch in its central

position ‘OFF’ the signal is routed direct to the mix. The signal

is now displayed on the main meters at the same level as the

channel meter. The level is now the same throughout the

console signal path, as set by the channel gain control. This is

the ideal setting with meters averaging 0dB so giving the best

signal-to-noise performance while maintaining plenty of

headroom to avoid clipping.

10 Listen to the main MIX 1 output. The music should be

heard in the headphones. If not, then check that the AUX 1 and

AUX 2 switches are released and that no CUE switches are

selected.

11 Check the effect of the Stereo EQ. Try the effect of

each of the 4 frequency bands on stereo channel 1. The EQ is

designed for creative live performance control and provides a

safe +6dB boost, and cut from a massive –30dB to infinity.

Experiment with cutting rather than boosting frequencies to

create dramatic effects.

12 Route through the Crossfader. Using the XFADE

toggle switch, select X to route the signal through the

crossfader rather than direct to the mix. The green 1 led lights

indicating that stereo channel 1 is assigned to the crossfader.

13 Using the Crossfader. This lets you fade between

signals routed to either side, typically to fade smoothly into a

new music track or to creatively layer sounds when scratch or

cut mixing. Experiment further by connecting two CD decks or

turntables and assigning one to X, the other to Y. The

channel(s) assigned to the crossfader are indicated by the

green leds above.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath Xone 92 in the language / languages: English as an attachment in your email.

The manual is 3,48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Allen-Heath Xone 92 Manual

Product: