541361
20
Zoom out
Zoom in
Previous page
1/48
Next page
Allen & Heath 20 XONE:4D User Guide
MIDI CONTROL
MIDI (musical instrument digital interface) is a standardised protocol for
communication between electronic music devices as well as between those
devices and computers. Two identical banks of MIDI controls are provided on
either side of the mixer section. These bring control of remote performance
equipment such as computer-based sound manipulation and sequencing, samplers,
effects and even lighting right to the mixer control surface. The function of the
controls may be identified using overlay sheets, samples of which are supplied
with the Xone:4D.
The control banks comprise both linear and rotary faders, rotary encoders with
integrated switches, push button switches with and without light ring indicators,
and large dedicated jog wheels with four position switches. A footswitch socket
and the 15-pin Game port provide control voltage input, which produce further
MIDI output from foot pedal, joystick and custom-wired controllers. Operation
of these controls does not affect any audio signals directly, but is automatically
translated into MIDI messages according to a pre-configured MIDI ‘map’. The
MIDI channel number, map and other functions are selected during the start-up
configuration procedure. Two MIDI maps are available to suit the various
performance software applications currently available. Further details are
provided later in this guide.
In addition to the dedicated MIDI controls, some of the DJ mixer functions also
output MIDI messages when operated. These include all switches with light rings,
the filter frequency controls, the crossfader, and BPM start/stop and clock. The
MIDI data is sent out of the mixer via the rear panel MIDI out and Game port
sockets, and is simultaneously transferred to a connected computer via the USB
interface. The MIDI surface has two ‘pages’, allowing all of the MIDI controls (with
the exception of the crossfader), to be mapped twice.
SOUNDCARD
The 20-channel USB2.0 soundcard is built into the mixer to ensure the highest
performance and lowest noise. 24-bit converters are used at a maximum
sampling rate of 96kHz, together with low latency ASIO drivers supplied by Allen
& Heath.
There are 4 stereo (8 mono) analogue and 1 stereo (2 mono) digital inputs to the
PC/Mac from the Xone:4D, and 4 stereo (8 mono) analogue and 1 stereo (2
mono) digital outputs from the PC/Mac to the Xone:4D.
The soundcard input block diagram is shown overleaf.
DESCRIPTION
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath Xone 4D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath Xone 4D in the language / languages: English as an attachment in your email.

The manual is 3,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Allen-Heath Xone 4D

Allen-Heath Xone 4D User Manual - German - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info