541361
19
Zoom out
Zoom in
Previous page
1/48
Next page
Allen & Heath 19 XONE:4D User Guide
DESCRIPTION
MIXER
Each of the 4 channels can select one of 3 sources: phono, line or soundcard
audio as shown. RIAA phono preamps are available on channels 1, 2 and 3.
These may be changed to line input by resetting an internal jumper link if required.
Level may be adjusted over a +/- 10dB range if the signal reads too high or low on
the channel meters. The 3-band EQ provides a safe amount of boost but full cut
(kill) for dramatic effect. A mic input with level and 2-band EQ routes direct to
the main mix. The DJ cues the mix using headphones. The mix may be added to
the cue’d channel signal to help the DJ synchronise the beat.
FILTERS
The channel signal may be routed direct to the LR mix or through either of the
two analogue filters. These provide the characteristic Allen & Heath analogue
filter sound with combinations of 3 switched bands, swept frequency, resonance
and tap tempo LFO control. The VCA crossfader affects the filter path when
switched in.
FX LOOPS
Two FX sends are provided. FX1 may be switched pre or post fader, while FX2
is pre fader. The send is typically connected to an effects device or sampler, then
routed back to the mix via one of the two FX return inputs.
OUTPUTS
The balanced XLR mix output feeds the house sound system. The monitor
output follows the main mix and can provide a booth monitor, alternative zone or
recording feed.
BPM COUNTER
Displays the BPM (beats per minute) of a music track entered manually by tapping
a button in time to the music, or automatically by analysing the signal routed to it.
The signal may be routed from the main mix or from an individual channel via the
pre-fade FX2 mix so that the beat may be calculated and checked before the track
is routed to the mix.
The BPM counter outputs MIDI clock so that a slave device such as a hardware or
software sequencer can be synchronized to the timing of a track playing through
the Xone:4D. To aid synchronization the MIDI clock can be momentarily speeded
up or slowed down by operating the PUSH/PULL lever.
UV REACTIVE PAINT
The white artwork on the front panel of the Xone:4D uses a UV reactive layer
and will therefore glow under UV light to improve visibility in low level light
conditions.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath Xone 4D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath Xone 4D in the language / languages: English as an attachment in your email.

The manual is 3,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Allen-Heath Xone 4D

Allen-Heath Xone 4D User Manual - German - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info