541347
12
Zoom out
Zoom in
Previous page
1/28
Next page
WZ16:2DX
AND
WZ12:2DX U
SER
G
UIDE
12
P
LUGGING
U
P
T
HE
S
YSTEM
The
Mix Wizard
series uses professional grade 3-pin XLR, 1/4" TRS jack and RCA PHONO
sockets. The applications diagrams on page 26 illustrate typical equipment interconnections. To
ensure best performance, we recommend that you use high quality audio cables and connectors,
and take time to check for reliable and accurate cable assembly. It is well known that most audio
system failures are due to faulty interconnecting leads.
C
ONNECTOR
P
INOUTS
C
ONNECTORS
, C
ABLES AND
T
HEORY
All input and output
XLR
connectors are 3-wire differentially balanced. These have 3 connector
pins: pin 1 = ground (cable screen), pin 2 = signal +ve, pin 3 = signal -ve
All the master output
jack
connectors are 3-wire impedance balanced. These have 3 connector
pins: tip = signal +ve, ring = signal -ve, sleeve = ground (cable screen).
Avoid reversing +ve and -ve on balanced connections as this will result in out of phase signals
(reverse polarity) causing signal cancellation effects. This situation is particularly common in multi-
microphone mixing.
For live work where long cables runs are required, balanced interconnections should be used.
Short interconnections between more affordable 2-wire (signal, ground) unbalanced effects units or
signal processors and mixing console may be utilised. Refer to the following diagram for
unbalanced to balanced connections.
D
EALING WITH
G
ROUND
L
OOPS
, B
UZZ AND
I
NTERFERENCE
For optimum performance all audio signals should be referenced to a solid, noise-free earth point,
frequently referred to as the ‘star point’ or ‘clean earth’.
A ground loop is created when the signal has more than one path to ground (earth). Should you
experience hum or buzz caused by ground loops, check first that each piece of equipment has its
own separate path to ground. If so, operate ground lift switches on connected equipment in
accordance with the instruction manuals. Alternatively disconnect the cable screen at the
destination end.
To avoid interference pickup keep audio cables away from mains power units and cables, thyristor
dimmer units or computer equipment. Where this cannot be avoided, cross the cables at right
angles to minimise interference.
C
ONNECTING
C
HANNEL
I
NPUTS
Both microphone and line sources such as keyboards, replay devices and effects processors can
be plugged into either the jack or XLR input for convenience. Do not connect to both at the same
time. The channel accepts a wide 70dB range of source levels. The balanced 3-wire input
provides the best immunity to interference pickup on long cable runs.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath WZ12 mixwizard at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath WZ12 mixwizard in the language / languages: English as an attachment in your email.

The manual is 3,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Allen-Heath WZ12 mixwizard

Allen-Heath WZ12 mixwizard User Manual - German - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info