541349

Allen-Heath PA-CP Series Manual

16
Zoom out
Zoom in
Previous page
1/36
Next page
16 PA-CP User Guide
AUX SENDS
The PA Series has four auxiliary sends.
These provide independent mixes from the channels. They
have many applications, the most common being foldback
monitor and effects sends. They can also be used for
additional special feeds such as recording or clean feed.
FB1 Pre-fade aux send feeding the FB1 foldback monitor
output. Turn up the control to send the channel signal to the
mix, from fully off to a maximum +6dB boost. The unity 0dB
position is indicated. The send is pre-fader but post-EQ and
post-mute. This means that its level is not affected by the
channel fader but it is affected by any changes made to the
EQ. Pressing MUTE also turns off the FB1 send.
FB2 Pre-fade aux send feeding the FB2 foldback monitor
output. Similar to FB1 described above.
AUX Post-fade aux send feeding the AUX output socket.
The AUX send is affected by the channel fader. The AUX mix
can be used for a variety of applications such as additional
effects send, independent speaker zone or recording feed.
FX Post-fade aux send to the internal effects unit and also the
FX output socket. Turn up the control to feed a portion of the
channel signal to the effects unit where it is processed to create
effects such as reverb and delay. The FX sends let you adjust
how much effect you add to each signal in the mix.
Aux sends are referred to as ‘pre-fade’ or ‘post-fade’.
This is because the signal that is routed to the send control is
sourced before (pre) or after (post) the channel fader. This is
illustrated in the BLOCK DIAGRAM in the Specification section
later in this user guide.
Effects sends are used to add effects such as
electronically simulated reverb or echo to the mix. Turning up
the FX control sends a portion of the channel signal to the
internal effects unit where it is processed before being returned
to the main mix through the FX channel. The processed ‘wet’
signal adds to the direct ‘dry’ signal in the same way as the
listener would hear a direct sound followed by natural room
reverberation. The FX send is post-fader to ensure that the
balance between direct and effect signal is always the same
regardless of fader position.
☺ Using more than one effects unit Use the AUX send to
feed another effects processor in addition to the internal effects
unit. You can also use the FX output with an external unit
instead of or mixing with the internal unit.
Foldback sends are used to provide individual or
groups of performers or backstage crew with their own monitor
mix, for example wedge speakers facing musicians on stage,
in-ear monitors, hotspot speakers, dressing room and lighting
position feeds. The mix is created by turning up the channel
FB sends according to the needs of the performers. It is not
affected by the faders which control what the audience hears.
☺ Setting up a foldback monitor mix Start with all the
channel sends turned fully down. Gradually turn up the sends
to add those sounds requested by the performers, typically the
vocals and a few lead instruments. Normal control position is
around 9 to 3’o’clock according to strength in the mix. Be
careful to avoid feedback between closely positioned mics and
speakers. Only add those sounds which are needed or
requested. Keep the mix as simple as possible and try to avoid
adding effects such as reverb which can muddy the sound on
stage and reduce the gain before feedback.
O
FB2
O
FB1
+6
O
O
AUX
O
O
+6
+6
=
O
PAN
O +6
RL
PK !
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath PA-CP Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath PA-CP Series in the language / languages: English as an attachment in your email.

The manual is 3,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info