541349
34
Zoom out
Zoom in
Previous page
1/36
Next page
34 PA-CP User Guide
Fitting the PA12-CP Rack Ears
A pair of 19” rack ears is provided with the PA12-CP. The ears
replace the front and side trims so that the console can be
mounted in a rack, plinth or case. Note that the PA12-CP can
fit into a standard 19” rack. The ears can fit in one of two
positions depending on how you want to mount the console in
the rack or other furniture.
The top panel assembly needs to be removed from the base to
gain access to the screws that hold the trims and ears in place.
Ensure that you have a suitable work surface with adequate
lighting and clear of any objects which may scratch or damage
the console panels. Tools required include a number 2 Pozi
and T10, T15 and T20 Torx screwdrivers.
1 Remove the 6x M3 countersunk top panel screws. Also
remove the 3x front and 3x rear M3 pan head fixing screws.
2 Carefully hinge the top panel assembly up from the base
as shown. Support the rear so that it does not slip. Unplug the
ribbon harness from the LR circuit card. You can now lift the
panel away and place it inverted on the work surface.
3 Unscrew the 6x 6B pan head front trim fixing screws shown
in the diagram. Take care to avoid damage to the faders. The
front trim including the armrest and carry handle can be
removed.
4 Locate the 4x internal M5 pan head screws fixing each side
trim to the chassis. Remove both trims. Align the rack ears in
the required position and fix these to the chassis using the 4x
M4 countersunk screws provided per side. Ensure they are
done up tight.
5 Check your work and ensure there are no loose parts or
debris in the chassis. Align the top assembly with the chassis
and plug in the ribbon harness. Make sure you align the plug
correctly with the socket. Carefully lower the assembly into
place. Refit the 6x top, 3x rear and 3x front fixing screws.
We recommend you keep the trims and their fixing screws in a
safe place for re-use in the future.
Do not obstruct the front or rear ventilation slots or
position the console where air flow required for ventilation
is impeded. The console must not be operated in any carry
or flight case that obstructs these slots. Ensure adequate
air flow when rack or plinth mounting the console.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath PA-CP Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath PA-CP Series in the language / languages: English as an attachment in your email.

The manual is 3,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info