541360

Allen-Heath ML-5000 Manual

41
Zoom out
Zoom in
Previous page
1/60
Next page
ML5000 User Guide 41
L MUTE GROUPS
Mute Groups Explained
A mute group lets you turn a selected combination
of channels on or off with a single key press. The
mute group key acts as a remote control for the
assigned channel mutes.
Mute groups are edited by selecting edit groups
mode and using the channel MUTE switches to
assign channels to the group. The assignment is
edited or viewed one group at a time. All mutes in a
group can be turned off (cleared) or turned on (set)
using the shifted recall function.
The ML5000 has 8 mute groups. You can select
more than one group at the same time. VCA group
mutes cannot be assigned to the mute groups.
Mute group settings are not stored as part of the
console snapshot memory system. However,
channels which have been muted by a group and
have not been made safe from the automation will
be stored.
L1 EDIT GROUPS. Press this switch to put the
console into edit groups mode. The red LED
flashes to warn that the console is in edit mode.
Press at any time while the LED is flashing to
restore normal operating mode. All the group
MUTE LEDs L2 and channel SAFE/EDIT LEDs
D3 turn off when edit mode is first entered. This
means that no group is selected for editing.
Only one group may be edited at a time. The
current assignments for the selected mute group
are displayed on the channel SAFE/EDIT LEDs.
L2 MUTE GROUP. Press one or more of these
momentary action switches to mute the channels
assigned to them. The switch illuminates when the
group is selected. Press again to turn the group off.
Note that you can release and reselect the assigned
channel mutes while the group is on.
To Assign a Mute Group
Press EDIT GROUPS L1 . Next, press the MUTE
switch L2 for the group you want to edit. Both
switches flash. The channel SAFE/EDIT LEDs D3
display which channels are currently assigned to
the group. Now press the channel MUTE switches
D2 to toggle channels in or out of the group. Press
EDIT GROUPS again to exit edit mode, or press
another group switch to edit a different group.
To clear all channels in a Mute group
While in edit mode, hold down SHIFT M9 and
press RECALL M7 . The recall switch flashes and
the display flashes CLr. Release shift and press
RECALL again to confirm. All channel SAFE/EDIT
LEDs turn off indicating that the group is cleared.
To assign all channels to a Mute group.
While in edit mode, hold down SHIFT M9 and
press RECALL M7 two times until the display
flashes SEt. Release shift and press RECALL
again to confirm. All channel SAFE/EDIT LEDs turn
on indicating that all channels are assigned.
Using Mute Groups
Applications include muting groups of instruments,
unused channels when mixing different bands, all
channels except walk in music before the show
starts, all effects, a bank of radio mics during an
instrumental number, stage mics during a scene
change, and so on.
EDIT
GROUP
SELECT GROUP TO EDIT
MUTE
ASSIGN USING CH MUTES
… 41 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath ML-5000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath ML-5000 in the language / languages: English as an attachment in your email.

The manual is 3,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info