541360
24
Zoom out
Zoom in
Previous page
1/60
Next page
24 ML5000 User Guide
B GROUP / AUXILIARY SENDS
These controls send the channel signal to the audio
groups 1-8 and aux sends 1-16. They are the same
for both the mono and stereo channels.
B1 GRP/PRE. The function of these switches is
determined by the setting of the mode switches in
the master section F .
With the mode switch in its up position this
becomes the channel routing switch to the related
audio group. The level is not affected by the
associated rotary control. The signal is sourced
pre-pan unless the GRP PAN ON switch C4 is
pressed in which case it is post-pan. This allows
mono or stereo grouping.
With the mode switch in its down position this
becomes the pre/post switch for the related aux
send. The pre-fade source follows the setting of the
internal jumper links.
B2 AUX SEND 1-8. These rotary controls adjust
how much channel signal is sent to the auxiliary
outputs 1-8. For the stereo channels the left and
right signals are combined to provide a mono feed.
The 0dB position is marked at 3 o’clock. An extra
+6dB boost is available.
With the master mode switch in its up position it
affects the level to the rotary master H only. The
source is post-fade.
With the mode switch in its down position it affects
the level to both the rotary master H and the
fader master F . In this case the source is post-
fade to the rotary master and pre or post to the
fader master according to the position of its
associated PRE switch.
B3 STEREO. These configure aux 9-16 in pairs
for mono or stereo operation. In the up position
they become independent mono sends. In the
down position they become stereo pairs with
separate level and pan controls.
B4 PRE. Switches the channel pre-fade signal to
aux 9-16 in pairs. In the up position the source is
post-fade. The pre-fade source follows the setting
of the internal jumper links.
B5 AUX SEND 9-16. These rotary controls
adjust how much channel signal is sent to the
auxiliary outputs 9-16. They function according to
the position of the STEREO switches described
above. An extra +6dB boost is available.
OO +6
OO +6
STEREO
9
LEV
9-10
10
PAN
OO +6
OO +6
STEREO
LEV
11-12
12
PAN
OO +6
OO +6
STEREO
LEV
13-14
14
PAN
OO +6
OO +6
STEREO
LEV
15-16
16
PAN
11
13
15
PRE
PRE
PRE
PRE
1
OO +6
AUX
2
OO +6
AUX
3
OO +6
AUX
4
OO +6
AUX
5
OO +6
AUX
6
OO +6
AUX
7
OO +6
AUX
8
OO +6
AUX
PRE
PRE
PRE
PRE
PRE
PRE
PRE
PRE
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath ML-5000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath ML-5000 in the language / languages: English as an attachment in your email.

The manual is 3,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info