541363
45
Zoom out
Zoom in
Previous page
1/48
Next page
ML3000 User Guide 45
Operating System Technical Support
Operating Software Version Number
You can check the current version number of the
ML3000 software running on the console using a
PC connected via RS232. Instructions for this are
provided on the Allen & Heath Internet site.
Loading New Operating Software
Check the Allen & Heath Web site for the latest
version of console software. New software is
loaded from a PC via the RS232 port.
IMPORTANT ! The current console settings and
snapshots may be lost when you load new
operating software. If you wish to keep your
settings and snapshot contents, first archive them
using the dump out facility. Restore these after
loading the new software by using dump in.
Download the software from the Allen & Heath Web
site to your PC computer. Connect the PC RS232
port to the console RS232 port using a standard
pin-to-pin (not null modem) 9-pin serial cable. Set
the console rear panel switch to the RS232 position.
Power up the console. The console awaits data
from the PC. Follow the instructions provided on
the Web site for loading the new software into the
console. When completed make sure you set the
console rear panel switch back to its normal
operating position, typically MIDI.
Power Up and Power Down
The console settings are remembered when power
is removed. On power up these settings are
restored.
To Reset the Console Settings
Hold down the ASSIGN and VIEW keys together
while powering up the console to reset all current
settings. This does not affect the contents of the
snapshot memories. The default settings are
restored:
Selects normal console operating mode
Clears all current Mute Group assignments
Clears all current VCA Group assignments
To Reset the Snapshot Memories
Hold down the ASSIGN and MIDI keys together
while powering up the console to clear all the
snapshot memories. This does not affect the
current console settings. For all snapshots reset:
Clears all stored mutes
Clears all stored VCA Group assignments
To reset all Settings and Memories
Hold down the ASSIGN, VIEW and MIDI keys
together while powering up the console to clear all
current settings and the memories.
Contacting Allen & Heath
If you have any queries about the operating
software please quote the console model, serial
number and operating system version number in
any communication with Allen & Heath or your
appointed service agent. Technical support is
available through your dealer or by visiting the Allen
& Heath Internet Web site.
www.allen-heath.com
support@allen-heath.com
SLAVE
mode
RS232
MIDI
Press and Hold with GRP MUTE
View on channels
MIDI
DUMP
CH1-16
Assign MUTE and VCA groups:
Select using GRP MUTE
Assign using CH MUTES
ASSIGN
VIEW
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath ML 3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath ML 3000 in the language / languages: English as an attachment in your email.

The manual is 3,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info