Manual Allen-Heath ML 3000 (page 24 of 48) (English)

541363

Zoom out

Zoom in

1/48

24 ML3000 User Guide

MAIN MIX and INPUT FADERS

This section applies to both the mono and stereo

channels.

MAIN MIX. A single switch routes the channel

signal to the 3 output main mix. Its balance and

image within the L, R and C outputs is determined

by the BLEND and PAN controls.

BLEND. Adjusts the balance between the LR and

C outputs. Fully anti-clockwise all the signal routes

to the LR outputs and none to C. At the detented

centre position the signal routes equally to the LR

and C outputs. Fully clockwise all signal routes to

the C output and none to LR. The control has a

3dB attenuation at centre position.

BLEND does not affect the group routing.

The stereo channels route stereo to LR and sum

the signal in mono to C.

PAN. Adjusts the balance between the L and R

outputs. It does not affect the C output. At the

detented centre position the signal routes equally to

L and R. PAN and BLEND combine to adjust the

balance between the 3 outputs.

PAN affects the group routing. It adjusts the

balance between odd and even groups 1-2 and 3-4.

The control has a 3dB attenuation at centre

position.

PAN adjusts the relative level of the left and right

signals of the stereo channels.

MUTE. This momentary action switch turns the

signal on or off, illuminating when the channel is

muted. Both the pre and post-fade signals are

affected unless the pre-fade pre-mute setting has

been internally configured. The channel can also

be muted by the mute groups, VCA group mutes,

snapshot memories (externally controlled) and MIDI

note on/off messages.

The switch also functions as an edit key when

assigning groups or the MIDI channel. In this case

the assign status is displayed on the GROUP

ASSIGNED indicator next to the fader.

The channel mute status is always displayed on the

switch regardless of mode.

SIG

ASSIGNED

GROUP

PFL

3-4

GROUP ASSIGN

MUTE

PAN

LCR

BLEND

1-2

MAIN

MIX

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath ML 3000 in the language / languages: English as an attachment in your email.

The manual is 3,51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Allen-Heath ML 3000 Manual

Product: