541363
22
Zoom out
Zoom in
Previous page
1/48
Next page
22 ML3000 User Guide
GROUP / AUXILIARY SENDS
These controls send the channel signal to the audio
groups 1-4 and aux sends 1-8. The layout is the
same for both the mono and stereo channels. For
the stereo channels the left and right signals are
combined to feed the mono auxes.
AUX SEND 1-4. These rotary controls adjust how
much channel signal is sent to the mono auxiliary
outputs 1-4. The 0dB position is marked at 3
o’clock. An extra +6dB boost is available. These
sends together with their rotary master controls are
usually used to feed the effects devices in FOH
mode. In MONITOR mode they would usually
provide monitor sends.
AUX SEND 5-6. These rotary controls adjust how
much channel signal is sent to the mono auxiliary
outputs 5-6. The 0dB position is marked at 3
o’clock. An extra +6dB boost is available. These
sends together with their fader master controls are
used for effects or monitor sends.
AUX SEND 7-8. These rotary controls adjust how
much channel signal is sent to the mono/stereo
auxiliary outputs 7-8. They function according to
the position of the STEREO switches described
below. An extra +6dB boost is available.
STEREO. This configures aux 7-8 for mono or
stereo operation. In the up position they become
independent mono sends. In the down position
they become a stereo pair with separate level and
pan controls. For the stereo channels the left and
right signals are combined to provide mono feeds
when the switch is in the up position. When
pressed they are routed in stereo to the pair of
auxes.
PRE. Switches the channel pre-fade signal to the
auxiliary outputs. Aux 1-4 is switched as a group of
four, aux 5-6 and 7-8 are switched in pairs. In the
up position the source is post-fade. When pressed
the source is pre-fade. The pre-fade source follows
the setting of the internal jumper links.
ROUTING SWITCHES. These route the channel
signal to the audio groups in pairs 1-2 and 3-4. The
signal is post-fader and follows the pan control.
Mono or stereo groups can be created using the
pan control. The LCRplus blend control does not
affect the signal routed to the groups.
3-4
L R
PAN
LR
=
LCR
BLEND
=
+
OO
1-2
C
MAIN
MIX
+6
+6
LEV
AUX
PAN
8
OO
AUX
7-8
7
OO
STEREO
+6
PRE
+6
AUX
6
OO
AUX
5
OO
+6
PRE
AUX
4
OO
AUX
3
OO
+6
+6
AUX
2
OO
AUX
1
+6
PRE
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath ML 3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath ML 3000 in the language / languages: English as an attachment in your email.

The manual is 3,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info