541378
26
Zoom out
Zoom in
Previous page
1/32
Next page
26 WZ20S User Guide
Application Notes
The WZ20S is well suited to many high performance live, recording and installed sound
applications including multi source stereo mixing, dual output submixing, club systems,
low end broadcast, production mixing… and more. The following notes present
suggestions for these applications. Of course, you may find different or better ways to suit
the particular requirements of your application.
Mixing Many Stereo Sources
There are many situations where you need to mix multiple stereo sources for
example keyboards, MIDI synthesisers, voice modules, sound cards, samplers,
outboard mic preamps, effects processors, CD, vinyl, DAT, MiniDisc, new media
players and recorders, stereo recorded tracks.
Dual stereo inputs You can connect two stereo sources to each channel and
switch between them or mix them together as required. Inputs A and B have
independent gain control so that the balance can be set as required. You do not
need to reset the gain each time you switch the inputs. You also have the
convenience of selecting either the RCA phono or TRS jack connections as
appropriate rather than using cable adapters.
External stereo inputs The two additional EXT inputs increase the number of
stereo inputs to 18. You still have the four mono channels for microphone or
line level inputs. The EXT inputs are best used to return the processed signal
from effects devices such as reverb, or to plug in a submixer. Remember to
select the MIX1(2) routing switches.
Signal processing All channels provide 4 band EQ for creative or corrective
equalisation. The six AUX sends provide plenty of outputs for effects, monitors
and special feeds. The effects can be returned to the EXT or dual stereo
channels. For example, two stereo reverbs could be combined on one stereo
channel. The mono channels and main outputs provide inserts for patching in
additional signal processors such as compressors.
Production and Recording
The number of inputs and processing power together with the sonic purity of
analog sound make the WZ20S well suited to professional recording and
program production.
Inputs Connect up to 4 microphones and 16 stereo line sources plus 2 effects
returns. Up to 6 stereo channel A inputs can be optionally fitted with the internal
RIAA card for direct connection to record decks. For multitrack recording you
can connect up to 16 track returns to the 8 stereo channels. You can use either
mono or stereo channels to connect to outboard mic preamps, increasingly
common in the studio.
Outputs The two stereo outputs can feed independent recording devices. This
is useful when recording translations and voiceovers. Use the MIX2 jack
outputs when connecting to low level devices. Set the EXT1(2) routing switches
to their up position when returning the 2-track outputs to the monitor select
bank.
Subgrouping Select MIX1 to MIX2 to create a stereo subgroup for single
fader control and inserted processing. In this case use MIX2 as the main
output.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath MixWizard Series WZ20S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath MixWizard Series WZ20S in the language / languages: English as an attachment in your email.

The manual is 4,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info