541345
23
Zoom out
Zoom in
Previous page
1/42
Next page
GL2800 User Guide 23
2-TRACK REPLAY and CONSOLE MONITOR
2TRK REPLAY
A stereo source such as a recording playback or
walk-in CD can be routed directly to the main LR mix. Adjust its level
from fully off to +10dB gain using the rotary control. You can check
the source on the meters and in the headphones before bringing it
into the mix by selecting the 2TRK monitor switch.
Console Monitor
Comprehensive engineer’s headphones and
local monitoring is provided. Select the source from the monitor
select switch bank. Pressing PFL or AFL elsewhere on the console
automatically overrides the current monitor source with the signal from
the channel or master selection. The red PFL/AFL active indicator
illuminates and the console meters display the active signal.
The console monitor meters provide 12 LED indicators to accurately
display the signal level of the selected monitor source. Reduce the
gain or level if the red ‘+16’ peak indicator lights. For optimum
performance the signals should be adjusted to read an average ‘0’
with loudest peaks reaching around ‘+6’.
Use the MONITOR level control to adjust the level in the headphones
and local speaker monitor. We recommend you use closed ear
headphones in the range 30 to 600 ohms designed for live sound
monitoring. 100 ohm headphones are a popular choice.
Three headphones sockets are provided for convenience. One ¼”
standard TRS is at the front
under the armrest, a second at the top
near the talkback mic. A small 3.5mm socket is also provided for
plugging in headphones or earpieces fitted with a mini jack. It is useful
to monitor an in-ear mix using the same type of earpiece as used by
the performers.
WARNING: To avoid damage to your hearing do not
operate any close-to-ear monitoring such as headphones for long
periods at high volume. Continued exposure to high volume
sound can cause frequency selective or wide range hearing loss.
Stereo Monitoring The GL2800 has been designed to offer
maximum capability for working with multiple stereo mixes such as
IEM and recording feeds. It is important to be able to hear exactly
what you are sending from the console. Press AUX 9-10 to check the
stereo aux mix. Press one switch to check a matrix in mono, two to
check a related pair in stereo. For example, press MTX1 to listen to a
mono fill mix, or press MTX1 and MTX2 together to listen to a stereo
recording mix.
Monitor Selection With all select switches in the up position, no
source is monitored unless PFL or AFL is activated. Press a switch to
select the required monitor source. Press two together to select stereo
as described above. Switches nearer the faders take priority. For
example, press L-R to listen to the main mix. Then press 2TRK to
override the L-R source until it is released.
POWER
+9
+6
+3
0
-3
-12
-16
-30
-20
-9
-6
+16
+10
2TRK
R
TO LR
2TRK REPLAY
OO
L
1-2
AUX
3-4
AUX
5-8
AUX
9-10
AUX
MTX3-4
MTX1-2
LATCH
L-R
MAXMIN
MAXMIN
ON
TALKBACK
OSC/NOISE
M
TALK
M
L-R
9-10
MONITOR
2TRK
AUX
MTX4
MTX3
MTX2
MTX1
100
PFL/AFL
MONITOR
STEREO
STEREO
STEREO
+10OO
9-10
AUX
1kHz OSC
PINK NOISE
PHONES
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath GL2800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath GL2800 in the language / languages: English as an attachment in your email.

The manual is 7,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info