541345
22
Zoom out
Zoom in
Previous page
1/42
Next page
22 GL2800 User Guide
12x4 MATRIX
The matrix adds to the powerful multi-tasking capability of the
GL2800. It provides a set of 4 additional console outputs. It is a
‘mixer within a mixer’ creating its output from any combination of the
groups, main LR mix and external inputs. It can be used to provide
duplicate main outputs or to create new mixes from these outputs.
The matrix controls are positioned conveniently away from the live
performance controls to avoid accidental operation.
Use the matrix to create special mixes for delay fill and zone speakers,
recording and broadcast feeds, IEM (in-ear monitors), hearing assist
loops and so on. Mono and stereo feeds can be created. For
example, mix L and R to create a mono sum output to feed an
additional zone, or use two matrix outputs with L fed to one, R to the
other to create an independent stereo main output. Mix in an external
source such as an ambience microphone preamp to add atmosphere
and audience reaction to a recording or monitor. Compensate for an
acoustically loud backline by boosting selected groups in a live
recording. For more information, refer to ‘Operating Tips’ later in this
guide.
EXT IN Mixes in an external nominal 0dBu line level source. The
rotary provides +6dB boost. Note that EXT IN jack sockets are
normalled (linked) in a way that lets you plug in a mono or stereo
common source to feed all the matrices, or an independent source to
each. Plug into EXT1 only to feed one source to all four matrix EXT IN
controls. Plug L into EXT1 and R into EXT2 only to feed a stereo
source to matrix 1-2 and 3-4.
Some examples include adding ambience sources to recordings and
in-ear monitoring, adding a direct output or an aux mix to quickly
create a monitor from the main mix plus selected channel/s, and
linking in another console to feed the same PA in a festival or other
dual console situation.
GRP 1-8 Mixes in the post-fader, post-mute group mix. The rotary
provides +6dB boost.
L,R,M Mixes in the post-fader, post-mute main LR mix. The rotary
provides +6dB boost. Turn up both L and R to create a mono sum
from the stereo LR mix. Turn up L in one matrix, R in another to create
a stereo output from two matrices.
LEVEL The master level control (fader) for the matrix. Provides
+6dB boost above the normal ‘0’ setting.
MUTE When pressed the matrix output is turned off. The red
indicator lights when the matrix is muted. Mute does not affect the
matrix AFL monitoring.
Note that the matrix mix can be checked using the meters and
headphones by selecting the related monitor select switches. These
provide both mono and stereo monitoring of the matrix.
MUTE
LEVEL
R
L
6
7
8
GRP
5
GRP
GRP
2
3
GRP
4
GRP
GRP
GRP
1
GRP
IN
EXT
M
OO +6
OO +6
OO +6
OO +6
OO +6
OO +6
OO +6
OO +6
OO +6
OO +6
OO +6
OO +6
OO +6
IN1
IN2
IN3
IN4
MATRIX EXT IN
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath GL2800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath GL2800 in the language / languages: English as an attachment in your email.

The manual is 7,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info