541348
21
Zoom out
Zoom in
Previous page
1/28
Next page
GL2200 USER GUIDE
21
AUX
PRE
PRE
3
to FOH
console
R
M
4
L
SEND
5
INSERT R
6
LINSERT
MONITOR
INSERT
RETURN
2-TRACK
4
INSERT
3
RETURN
STEREO
mic
splitter
AMPLIFIERS
1
2
1
TALKBACK
RETURN
STEREO
INSERT
2 1
INSERT
IN
16
12
MIC
R
STEREO
15
L/MONO
DIRECT
10
OUT
DIRECT
OUT
9
DIRECT
8
OUT
IN
14
MIC
R
11
STEREO
13
L/MONO
MIC/LINE
LINE
IN
IN
INSERT
10
MIC/LINE
LINE
IN
IN
INSERT
9
MIC/LINE
LINE
IN
IN
INSERT
8
PROCESSOR
DIRECT
7
OUT
DIRECT
6
OUT
DIRECT
5
OUT
DIRECT
4
OUT
MIC/LINE
LINE
IN
IN
INSERT
7
MIC/LINE
IN
LINE
IN
INSERT
6
MIC/LINE
IN
LINE
IN
INSERT
5
MIC/LINE
IN
LINE
IN
INSERT
4
SIGNAL
DIRECT
3
OUT
DIRECT
OUT
2
DIRECT
1
OUT
IN
MIC/LINE
LINE
IN
INSERT
3
MIC/LINE
LINE
IN
IN
INSERT
2
IN
MIC/LINE
LINE
IN
INSERT
1
STAGE MONITORS
EQUALISERS
GRAPHIC
inserts
1
2
3
4
4
2
3
L
R
5
6
STAGE MONITOR
This example shows the 6 aux
sends routed through the main
groups and L-R outputs to provide
6 independent stage monitor
mixes with metering, MUTE
switches, inserts and balanced
XLR connectors.
The AUX/GROUP reverse
switches reroute the group and L-
R mix to the aux jacks outputs for
additional monitoring or effect
sends or as independent submix
facilities. For example, aux 5 and
6 jack outputs may provide a
seperate stereo mix output from
the channel L-R routing switches
and the additional 4 stereo return
line inputs.
Use the groups to add effects
such as delay, reverb or echo to
the stage monitors.
GRAPHIC EQUALISERS
Graphic equalisers plugged into the console inserts are
an invaluable aid to reducing on-stage acoustic
feedback and enhancing the clarity of the monitors.
Using AFL allows the stage engineer to check the
operation of the equalisers in the listen wedge monitor.
It is best to use the same type of loudspeaker for the
engineer's monitor as those used on stage.
These switches are recessed to
avoid accidental operation. Set
using a pen tip or pointed object.
Set the AUX REVERSE switch to
the down position (below panel) to
route the aux mix through the
groups and L-R XLR outputs for
stage monitor level control with
fader.
Set LR SUM MONO switch to down
(below panel) for engineer's listen
wedge following PFL/AFL.
ENGINEER'S WEDGE MONITOR
Set up the WEDGE MIX by
selecting one or a combination of
the groups/L-R AFL switches to
listen to the desired monitor
outputs. These are post insert and
therefore post graphic EQ and
post fader for accurate monitoring.
Pressing any PFL or AFL switch
allows channel set up and signal
checking.
TALKBACK
Selecting the GRP 1-4 and L-R
switches in the OSC/NOISE
section enables talkback to the
performers using the stage
monitors.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath GL2200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath GL2200 in the language / languages: English as an attachment in your email.

The manual is 3,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info