541348
20
Zoom out
Zoom in
Previous page
1/28
Next page
GL2200 USER GUIDE
20
(compressor)
L
R
FOLDBACK
GROUPS 3 & 4
pre-fade aux sends
GRAPHIC EQUALISERS
inserts
R
L
2 TRACK RECORDER
MULTITRACK RECORDER
playback
record
CD PLAYER
inputs
5
L R
RL
42
RETURN
STEREO
56
M
RINSERT LINSERT
SEND
INSERT
MONITOR
2-TRACK
RETURN
3421
INSERT
3
INSERT
1
INSERT
RETURN
STEREO
MIC
L/MONO
16
TALKBACK
12
MIC
R
STEREO
IN
15
L/MONO
14
MIC/LINE
DIRECT
10
OUT
11
R
IN
9
DIRECT
OUT
MIC/LINE
IN
INSERT
STEREO
13
IN
LINE
IN
10
INSERT
LINE
IN
9
direct outs
MIC/LINE
DIRECT
INSERT
DIRECT
OUT
8
MIC/LINE
IN
7
DIRECT
OUT
MIC/LINE
IN
INSERT
LINE
IN
8
INSERT
LINE
IN
7
MIC/LINE
DIRECT
6
OUT
5
OUT
IN IN
DIRECT
4
OUT
MIC/LINE
IN
INSERT
LINE
IN
6
LINE
IN
5
INSERT
LINE
IN
4
MIC/LINE
DIRECT
INSERT
3
DIRECT
OUT
MIC/LINE
IN
2
DIRECT
OUT
MIC/LINE
IN
INSERT
LINE
IN
3
INSERT
LINE
IN
2
1
OUT
IN
LINE
IN
1
Post fader aux sends
EFFECTS
Post fader aux sends
EFFECTS
stereo chans
returns
6
returns
insert
PROCESSOR
SIGNAL
4
2
MONO
GROUPS 1 & 2
MONO
3
1
PRE
AUX
POST
GRAPHIC EQUALISERS
Graphic equalisers are used to
compensate for adverse room
acoustics. These devices help
reduce acoustic feedback and
enhance the clarity of the
sound.
FRONT OF HOUSE
AUX SENDS
Select aux 1-4 post-fade to access 4
effects processing devices. Use the
stereo returns and stereo inputs to add
the effects to L-R and mono mix.
Select aux 5-6 pre-fader for foldback
monitor sends.
AUX MASTERS
These switches are recessed
to avoid accidental operation.
Set using a pen tip or pointed
object.
Set the AUX REVERSE
switches to the up position for
conventional aux/group
operation
Set the LR SUM MONO
switch to up for mono out
(L+R sum)
2-TRACK RECORDING AND
INTERMISSION REPLAY
Use the console 2-track send and return
sockets for connecting a cassette or
DAT recorder and a CD player. Connect
the CD player to the console two track
return sockets for intermission replay.
This does not affect the recording
process.
MULTITRACK RECORDING
Connect the inputs of the multitrack to the
channel direct out sockets to record each
channel on a se
p
arate track for mix down later.
INSERTS
The inserts on the
channels and outputs may
be used for outboard
effects and signal
processing devices such
as compressors, limiters
and graphic equalisers.
This example shows the 4 groups,
L - R and Mono outputs feeding a
7-stack FOH amplification system.
The groups provide independent
control of the additional left and
right loudspeaker stacks or may
be used for zone feeds or for
subgrouping to the L-R mix.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath GL2200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath GL2200 in the language / languages: English as an attachment in your email.

The manual is 3,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info