541348
6
Zoom out
Zoom in
Previous page
1/28
Next page
GL2200 USER GUIDE
6
CONNECTING POWER TO THE CONSOLE
Refer to the SAFETY WARNING on page 4 of this User Guide. Read and understand the warnings
and instructions printed on the rear panel of the console and printed here.
The GL2200 console can be powered from either the internal power supply, from an external
DC supply such as the Allen & Heath RPS11, or both together. The LED indicators on the rear
panel illuminate to indicate which supply is active.
Normally the internal power supply will be used to power the console by the standard 3 pin IEC
mains input connector. A mains cable with moulded mains plug suitable for the local supply is
supplied. Check that the correct mains lead with moulded plug has been supplied with your
console. Ensure that the IEC mains plug is fully inserted into the rear panel socket before
switching on.
POWER SUPPLY
The internal power supply for the GL2200 is a switch mode supply and will operate from a wide
range of mains input voltages. It produces the DC voltages required by the console. Before
switching on your console, check that the ac mains fuse is of the correct type and rating. This is
clearly marked on the rear panel of the console. Do not replace the fuse with any other type, as
this could become a safety hazard and will void the warranty.
AC~ mains input voltage Fuse value
100 - 230V ±10% T 1A 250V 20mm
DO NOT O
B
SEE INST
A
WARNING: TO REDUC
T1A 250V 20mm
WARNING - THIS APPARATUS MUST BE EARTHED.
EXTERNAL SUPPLY INTERNAL SUPPLY
ACTIVE ACTIVE
100 - 240V~
100 - 240V.AC
47-63Hz ~ 60W MAX
SUPPLY VOLTAGE RANGE:
NO USER
S
WARNING: DISCONNECT SUPPLY BEFORE CHANGING FUSE.
ATTENTION: COUPER L'ALIMENTATION AVANT DE CHANGER LE FUSIBLE.
CAUTION: FOR CONTINUED PROTECTION AGAINST RISK OF FIRE REPLACE FUSE
ATTENTION: REMPLACER LE FUSIBLE AVEC UN DES MEMES CARACTERISTIQUES.
WITH SAME TYPE AND RATING.
Ensure adequate ventilation around the console. Do not cover the
console or position it on soft furnishin
g
s durin
g
operation.
The console must be connected to 0V ground by either the a.c.
mains input cable or by the EXTERNAL DC IN cable.
CAUTION: For continued protection against the risk of fire, replace
fuse onl
y
with the correct t
yp
e and value.
The console power supply unit contains no user serviceable parts.
Do not remove the cover. Refer servicing to qualified service
personnel only.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath GL2200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath GL2200 in the language / languages: English as an attachment in your email.

The manual is 3,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info