541348
4
Zoom out
Zoom in
Previous page
1/28
Next page
GL2200 USER GUIDE
4
INTRODUCTION
The GL2200 continues ALLEN & HEATH’s commitment to provide high quality audio mixing consoles
engineered to meet the exacting requirements of today’s audio business. It brings you the latest in
high performance technology and offers the reassurance of over two decades of console manufacture
and customer support.
This user guide presents a quick reference to the function, application and installation of the GL2200.
We recommend that you read this guide fully before operating the console For further information on
the basic principles of audio system engineering please refer to one of the specialist publications
available from bookshops and audio equipment dealers.
Whilst we believe the information in this guide to be reliable we do not assume responsibility for any
inaccuracies. We also reserve the right to make changes in the interest of further product
development.
SERVICE AND TECHNICAL SUPPORT
Under normal conditions the GL2200 does not require user maintenance or internal calibration. Any
service work required should be carried out by qualified service personnel only.
We are able to offer further product support through our world-wide network of approved dealers and
service agents. You can also access our Web site on the internet for information on our product
range, assistance with your technical queries or simply to chat about audio matters. To help us
provide the most efficient service please keep a record of the console serial number, and date and
place of purchase to be quoted in any communication regarding this product.
GENERAL PRECAUTIONS
Your GL2200 is ruggedly constructed to give many years of reliable operation. However, you will
extend the life of the console and preserve its cosmetics by applying these simple common sense
precautions.
Avoid storing or using the mixing console in conditions of excessive heat or cold, or in positions
where it is likely to be subject to vibration, dust, dirt or moisture.
Do not use any liquids to clean the control surface of the console, a soft dry brush or dry lint-free
cloth is ideal.
Use only water or ethyl alcohol to clean the trim and scribble strips. Other solvents may cause
damage to paint or plastic parts.
The faders, switches and potentiometers are lubricated for life. The use of electrical lubricants on
these parts is not recommended.
Avoid using the console close to strong sources of electromagnetic radiation (e.g. video monitors,
high power electric cabling): this may cause degradation of the audio quality due to induced
voltages in connecting leads and chassis. For the same reason, always site any external power
supply away from the unit.
SAFETY WARNING!
Mains electricity is dangerous and can kill. Mains voltage
is present within the console power supply.
Do not remove the power supply cover with mains
electricity connected. To ensure your safety, mains earth
is connected to the chassis through the power lead. Do
not remove this mains earth connection.
To avoid the risk of fire, replace the mains fuse only with
the correct value and type as indicated on the power
supply unit.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath GL2200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath GL2200 in the language / languages: English as an attachment in your email.

The manual is 3,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info