693705

Alesis MULTIMIX 8 USB FX Manual

5
Zoom out
Zoom in
Previous page
1/24
Next page
5
19. CHANNEL PAN – Adjusts the (mono) channel's position in the stereo field.
20. BALANCE (CH 5/6 & 7/8) – Adjusts the balance between Channels 5 and 6 and Channels 7 and 8.
21. LO EQ (BASS) – Adjusts the low (bass) frequencies of the channel.
22. MID EQ – Adjusts the mid-range frequencies of the channel.
23. MID EQ FREQ – Adjusts the frequency that the CHANNEL EQ (MID) will boost or cut.
24. HI EQ (TREBLE) – Adjusts the high (treble) frequencies of the channel.
25. AUX PRE SEND – Adjusts the channel audio (pre-EQ) level that is sent to the AUX SEND output. You can use this to
apply external effects to individual channels, or to create a custom monitor mix for yourself or your musicians.
26. FX POST SEND – Adjusts the channel audio (post-EQ) level that is sent to MULTIMIX 8 USB FX's internal effects
processor. Turn this up for the channels that you want internal effects applied to.
27. EFFECTS SELECTOR – Selects the effect that MULTIMIX 8 USB FX's internal effects processor will apply to the
various channels. Each channel can send different levels of audio to the processor by adjusting their FX POST SEND
knobs. See the EFFECTS section for an explanation of the available effects.
28. AUX RETURN LEVEL – Adjusts the volume of the AUX RETURN INPUTS.
29. FX RETURN LEVEL – Adjusts the volume of the MULTIMIX 8 USB FX's internal effects processor.
30. LED METERS – Shows the audio level of the main mix. Turn the volume down if the CLIP LED lights up excessively.
31. 2 TRKS/USB TO MAIN – Routes the audio from your computer and the
2 TRACK INPUTS to the MAIN OUT.
32. 2 TRKS/USB TO MONITOR – Routes the audio from your computer and
the 2 TRACK INPUTS to the MONITOR OUT and your headphones.
33. MAIN TO MONITOR – Routes the audio heard through the MAIN OUT to
the MONITOR OUT and your headphones.
34. MAIN VOLUME – Adjusts the volume of the MAIN OUT.
35. MONITOR VOLUME – Adjusts the volume of the MONITOR OUT.
36. PHONES VOLUME – Adjusts the volume to your headphones.
EFFECTS
TO HEAR THE EFFECTS ON A CHANNEL: Turn up the FX POST SEND (26) for that channel. Then, turn up the FX
RETURN knob (29). Press the MAIN TO MONITOR button to hear the mix in your headphones. Use the EFFECTS
SELECTOR KNOB (27) to choose one of the effects below:
ROTATING SPEAKER EFFECT
ROTARY: Fast rotary speaker simulator creates the classic, lush Doppler effect of an organ’s spinning horn. Effective on
guitars, vocals, keyboards and other instruments.
REVERB EFFECTS
HALL 1: A large, bright concert hall reverberation effect suitable for vocals and instruments.
HALL 2: A large, warm concert hall reverberation effect suitable for drums, piano and other instruments.
ROOM 1: A medium-sized, moderately bright reflective room reverberation effect suitable for vocals, lead guitars and other
instruments.
ROOM 2: A small, very reflective bright room reverberation effect suitable for drums and percussion as well as electric guitars
and other instruments.
ROOM 3: A large, warm room reverberation effect suitable for acoustic instruments.
PLATE 1: A lush, smooth vocal plate reverb with a long decay time and warm tonality.
PLATE 2: An emulation of vintage plate reverb with bright, slightly tinny tonality and a medium-length decay.
PLATE 3: A short, bright plate reverb effective for creating subtle spaces.
MODULATION EFFECTS
CHORUS: A complex, 6-voice chorus ensemble effect with short delays often referred to as a "Chorus / Doubler". Discrete
stereo signal path. Slow and watery.
FLANGE: Classic stereo flange: a slow, slightly metallic sweep with a discrete stereo signal path.
DELAY EFFECTS
DELAY 1: A simple slap-back echo with no feedback particularly effective on vocals and rhythm guitars.
DELAY 2: Medium-length poly-rhythmic delay with crossover feedback. 3 to 4 ratio between L and R delay times (291 to
388ms) for 3/4 vs. 4/4 feel. Useful for solo instruments where a long, trailing echo effect is desired.
MULTI EFFECTS
CHORUS – ROOM 1: Room reverb into a slow flanging modulation creates a spacey effect.
CHORUS – ROOM 2: Fast modulation provides a dramatic chorus effect in a small room for a very lush chorus + reverb sound
with a discrete stereo signal path.
BYPASS: Bypasses the effects processor – no effects will be heard.
When recording to your computer,
make sure the 2 TRKS/USB TO MAIN
switch is in the up/raised position to
avoid feedback in your recording.
Alternately, you can deactivate the
"software playthrough" function in your
software while recording.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alesis MULTIMIX 8 USB FX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alesis MULTIMIX 8 USB FX in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info