693705

Alesis MULTIMIX 8 USB FX Manual

4
Zoom out
Zoom in
Previous page
1/24
Next page
4
TOP PANEL FEATURES
1. POWER LED – Illuminates
when the MULTIMIX 8 USB
FX is on.
2. PHANTOM POWER LED –
Lights up when phantom
power is engaged.
3. MAIN OUT – Use standard
1/4" cables to connect this
output to the house speaker
or amplifier system. The level
of this output is controlled by
the MAIN VOLUME knob.
4. MONITOR OUT – Use
standard 1/4" cables to
connect this output to your
monitor speaker or amplifier
system. The level of this
output is controlled by the
MONITOR VOLUME knob.
5. PHONES – Connect your 1/4"
headphones to this output.
The PHONES knob controls
volume.
6. AUX SEND OUTPUT – You
may connect the input of an
external device (usually an
outboard effects device) to
this output with a 1/4" mono
cable. This output can also
be used to create a custom
monitor mix for onstage
musicians. You can adjust
the level with the AUX
RETURN LEVEL knob.
7. AUX RETURN INPUTS – You
may connect the outputs of an
external device to these
inputs with 1/4" mono cables.
This is usually used for outboard effects devices but can also be used like an extra input channel for synthesizers, drum
machines, etc. If your source is mono, plug it into the left jack and it will be heard on both the left and right sides.
8. 2 TRACK INPUTS – You may connect the outputs of an external recording device to these inputs using standard RCA
cables. This can be used to listen to a 2-track recording you’ve just made, or to connect to a personal media player to
play pre-recorded music before your live gig. Press the 2 TRKS/USB TO MONITOR button to hear this in your
headphones or monitor speakers. Press the 2 TRKS/USB TO MAIN to hear this in the house speakers.
9. 2 TRACK OUTPUTS – You may connect an external recording device to these outputs using standard RCA cables.
10. FOOTSWITCH – When a footswitch is connected to this jack with a 1/4" TRS cable, it can be pressed to allow all
channels to bypass MULTIMIX 8 USB FX's internal effects processor. This jack supports Boss FS-5L and FS-6 pedals
or other latching-type footswitches (not included).
11. MIC INPUT – Connect a microphone to these inputs with an XLR cable.
12. LINE INPUT – Connect line-level devices to these inputs with 1/4" cables.
13. INSERT – The insert jack allows you to insert a compressor, EQ, or any
other signal processor in between the MULTIMIX 8 USB FX's preamplifier
and A/D converter. Use a standard 1/4" TRS cable when connecting a
device to this insert.
14. LO CUT SWITCH – When this button is depressed, the channel's high-
pass filter will engage, reducing frequencies below 80 Hz to reduce any
low-level noise.
15. GUITAR SWITCH – When this switch is in the down position, Channel 2
will serve as a high-impedance input for connecting guitar or bass
instruments. When the switch is in the up position, Channel 2 will accept
mic or line-level signals.
16. GAIN – Adjusts the channel audio level (pre-fader and pre-EQ gain).
Adjust this so that the PEAK LED just barely lights up during the loudest
parts of the song.
17. CHANNEL VOLUME – Adjusts the audio level on the channel.
18. PEAK LED – The LED will flash red if the signal is clipping. If this
happens, decrease the setting of the GAIN knob or CHANNEL VOLUME
knob.
When using LINE INPUTS 5/6, 7/8, and
the AUX RETURNS:
• If only the left channel is used, the
signal will be heard in both left and
right channels and the balance will
not be adjustable.
• If only the right channel is used, the
signal will be heard in the right
channel only.
Use standard 1/4" TRS (ti
p
-rin
g
-sleeve)
cables when connecting devices to the
INSERT jacks. The signal is sent from
the tip of the cable and returns on the
ring.
TRS (tip-ring-sleeve)
TS (tip-sleeve)
12
3
3467
710
11 11 11 11
12 12
13
14 1415 14 14
13
12 12
16
16
16 16
12
12
12
12
8
8
9
9
4
5
19 19 19 19 20 20
21 21 21 21 21 21
25 25 25 25 25 25
26 26 26 26 26 26
28
29
30
31
3233
36
3435
27
17 17 17 17 17 17
18 18 18
18
24 2422 22 22 22
23 23
24 24
24 24
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alesis MULTIMIX 8 USB FX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alesis MULTIMIX 8 USB FX in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info